Summary of Contents for The Original Pink Box PB18VREC
-
Page 1: Instruction Manual
18V Cordless Reciprocating Saw Mod. PB18VREC Lithium-Ion Instruction Manual Please read this manual carefully before using the tool. Battery & charger are sold separately. -
Page 2: Technical Data
Technical Data Rated Voltage DC 18V No-load Speed 0-3000/min Stroke length 22mm - Battery cell Li-Ion Battery, 1500mAh Samsung Battery Charger -Rated Voltage 120V, 60Hz -Output Voltage DC 22.7V, 380mA -Charging Time 3-5 hours Remark Battery & charger are sold separately. Product Features 1. - Page 3 metals or hard materials that cannot be cut form an edge. Drill a staring hole larger than the widest part of the blade. Battery Pack Operation To Charge the Battery 1. Contact the charger and charger base 2. Firmly insert battery pack onto charger base 3.
-
Page 4: General Safety Rules
To Detach Battery Pack Depress both battery-release buttons located on the side of the battery pack to release the battery pack. Pull the battery pack out and remove it from the tool. CAUTION: When placing battery pack in your cordless reciprocating saw, be sure raised rib on battery pack aligns with groove in saw’s battery port and latches snap in place properly. - Page 5 operated (cordless) power tool. 1) Work area a) Keep work area clean and well lit. Cluttered and dark areas invite accidents. b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
- Page 6 reduce personal injuries. c) Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
- Page 7 in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation. 5) Battery use and care a) Recharge only with the charger specified by the manufacturer.
Need help?
Do you have a question about the PB18VREC and is the answer not in the manual?
Questions and answers