Contour +2 User Manual page 15

HOW TO USE
Pressing the Status Button turns the GPS on for a few minutes to help
ensure that GPS data will be captured before you begin recording. The GPS
Status LED will change from flashing to solid green when a Position Fix is
obtained. A flashing green LED means it is still trying to get a Position Fix.
You can also reduce the time it takes to get an initial Position Fix by
connecting the camera to Contour Storyteller or the Contour Connect
mobile app. This allows a GPS Assist file to be installed onto the camera.
The files contains current data that can help the GPS system obtain an
initial Position Fix faster (often 10 seconds or less). Once the GPS Assist
file is installed it is valid for up to 14 days. After this you will need to
connect to Contour Storyteller or the Contour Connect mobile app again to
get a new GPS Assist file.
If your Contour+2 has obtained a Position Fix within the last two to four
hours and a charged battery has remained in the camera, then the camera
will typically obtain a Position Fix again within a few seconds of pressing
the Status Button or sliding the Record Slider forward. If the battery has
been removed or completely drained, the camera will have to start from
scratch to obtain a Position Fix.
43
Contour+2 User Manual