Sony Trinitron KV-XA29M60 Service Manual page 47

4-2. CONVERGENCE
Preparation :
•
Before starting this adjustment, adjust the focus, horizontal size
and vertical size.
•
Receive dot/hatch signal.
•
Pic mode: Personal (Pic 90%, Brightness 50%, Col 50 %,
Hue 50%, Shp 50%).
(1) Horizontal and Vertical Static Convergence
Center dot
R G
H. STAT VR
1. (Moving horizontally), adjust the H.STAT control so that the
red, green and blue dots are on top of each other at the center of
the screen.
2. (Moving vertically), adjust the V.STAT magnet so that the red,
green and blue dots are on top of each other at the center of the
screen.
3. If the H.STAT variable resistor cannot bring the red, green and
blue dots together at the center of the screen, adjust the
horizontal convergence with the H.STAT variable resistor and
the V.STAT magnet in the manner given below.
(In this case, the H.STAT variable resistor and the V.STAT
magnet influence each other, so be sure to perform adjustments
while tracking.)
http://cxema.ru
R
G
B
B
V. STAT
Magnet
RV701
SCREEN (G2)
C6 Board
Purity
DY pocket
V.STAT
RV702
H. STAT
1
V. STAT
b
2
H. STAT VR
R
3
b
– 47 –
KV-XA29M60/XA29M84
BMC
BMC (Hexapole)
Purity
V.STAT
a
a
B
b
G
R
a
b
G B B G R
a
a
R
G
b
B
RM-954 RM-953
b
B
G
R
b
B
G
R