Detaching the Stand base
1
Place the screen face down.
caUTIoN
To protect the screen from scratches, cover
y
the surface with a soft cloth.
2
BodyTurn the screws on the Stand base to the
left to detach the Stand base from the Stand
body.
caUTIoN
The components in the illustrations may differ
y
from the actual product.
Do not carry the monitor upside down, as this
y
may cause it to fall off its stand and result in
damage or injury.
To avoid damaging the screen when lifting
y
or moving the monitor, only hold the stand
or the plastic cover. This avoids putting
unnecessary pressure on the screen.
aSSEMbLING aND PREPaRING
Installing on to a Table
1
Lift the monitor and place it on the table in an
upright position.
Place at least 10 cm away from the wall to
ensure sufficient ventilation.
10 cm
10 cm
2
Connect the Power cord to a wall outlet.
3
Press the
(Power) button on the bottom of
the monitor to turn it on.
caUTIoN
To avoid the risk of electric shock, disconnect
y
the Power Cord before moving or installing
the monitor.
9
10 cm
10 cm