Summary of Contents for Camos BHS-500
- Page 1 Instruction manual BHS-500 / BHS-600 Instruction manual BHS-500 / BHS-600 Headset for Wireless Communication via Bluetooth Technology...
- Page 2 CAMOS owns all intellectual property rights including copyright on the instruction manual, hardware and related software of the BHS-500 and BHS-600 which will be protected by Copy- right Act. Without CAMOS‘s written permission, they cannot be copied, re-printed or translated into other languages.
- Page 3 3rd party. Product warranty shall not apply to any failure or malfunction which results from improper maintenance, operation or unauthorized modification of the pro- duct. During the warranty period, Camos does not warrant the repairing of the products resulting from any of the following circumstances: 1) Improper maintenance 2) Modification or replacement of parts in the user‘s disposition...
- Page 4 Safety Rules Important warnings Do not use the product in a bathtub. Do not pull the plug with wet hands. This may cause an electric shock. Do not use unapproved power voltage. This may cause fi re or electric shock. Do not use a damaged electric cord.
- Page 5 Hereby, CAMOS Co.Ltd., declares that this BHS-500 and BHS-600 are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
-
Page 6: Table Of Contents
Key functionalities Making a call during intercom LED Signals conversation Headset mounting/dismounting Appendix Settings Battery recharge time Headset power on/off Headset specifications Headset registrations & connections Functions BHS-500 & 600 Accept call Make a call Play music... -
Page 7: Introduction
Introduction Box content Bracket B Bracket A Headset Box Recharger 5V with clip with tape Additional: Instruction manual Double-sided adhesive tape Earphones 1 microphone for Full-face helmet 1 microphone for Jet/Flip-up helmet... -
Page 8: Recharge Battery
Recharge battery The original headset is equipped with a Li-Polymer rechargable battery. Before using the headset for the first time, completely recharge the battery. The recharge time of the battery is two hours. 1) Charging Only recharge the unit with the included 5V recharger. Connect the headset to the charge socket. -
Page 9: Function Overview
Function overview The unit includes the following functions: Talk/Intercom functions (nur BHS-600) Telephone functions • Intercom functionality between driver & • Automatic call detection passenger • Redialing • Call acceptance during intercom func- • Re-direct call to headset tionality; at incoming call, the intercom •... -
Page 10: Product Description
Product description Green LED (only BHS-600) Bracket A Red LED „+“ Key „-“ Key Bracket B TALK-Key Pairing Switch5 CH1/CH2, only BHS-600 ) Reset-Key Master/Slave Switch (only BHS-600) DC 5V... -
Page 11: Key Functionalities
Minimize volume • Maximize volume • Power on/off: Press key for 3 seconds „+“ key • Pairing BHS-500: Press the key for • Mazimise volume 3 sec. until the red LED is blinking very fast • Redialing: Press key 1x •... - Page 12 Functions Channel 1 (BHS-500 & 600) Channel 2 (nur BHS-600) • For pairing channel 2 change to Choose Master / Master or Slave according to usage Slave for channel 2 (Switch sideways) Reset Key (Below CH1/CH2 Reset of all settings.
-
Page 13: Led Signals
LED signals Mode Key opera- Display red LED Display green LED tion time Activate Flashing for 2 sec., then „-“ Key 3 sec. CH 1: Stand-by mode Activate Flashing for 2 sec., then „+“ Key 3 sec. CH 2: Stand-by mode Stand-by Every 100 ms 1x fl... - Page 14 Mode Key operation Display red LED Display green LED time Voice dialing „T“ Key 2 Sec. Finish call „T“ Key Press shortly „-“ & „ +“ Press together Play music for 3 Sec. „-“ & „ +“ Press together Stop music for 3 Sec.
-
Page 15: Headset Mounting/Dismounting
Headset mounting/dismounting 1. Fix bracket A backside or side- 2. Mount the head- ways on your helmet by using set box with the the double sided adhesive tape bracket 3. Alternatively to this you can also use the clip (bracket B) to mount the helmet sideways (see fi... -
Page 16: Settings Headset Power On/Off
Settings Headset power on/off The headsets will be switched on/off differently depending on the channel. If you want to switch on the headset, please press the relevant key for 3 sec. If you press this key again, the headset will be switched off. CH 1 „-“... -
Page 17: Headset Registrations & Connections
1.) Connect headset with mobile phone (Channel 1) 1a) BHS-500: Press the „-“ key to activate the headset. After this, press the „+“ key until the red LED is blinking fast. Activate the Bluetooth function of your mobile phone simultaneously. - Page 18 2.) Connect the headset with audio device (Channel 1) 1a) BHS-500: Press the „-“ key to activate the headset. After this, press the „+“ key until the red LED is blinking fast. Activate the Bluetooth function of your audio device simultaneously.
- Page 19 4.) Connect Two Way Radio on channel 2 (only BHS-600) Instead of intercom function you can link a two way radio which is equipped with a bluetooth adapter. 1) Switch the headset‘s key in „Slave Mode“ position. 2) Switch the Pairing-key of your headset from position CH2 for a short time to position CH1 and back to CH2.
- Page 20 Important notes to 3 • Channel 1 can only be used for the connection to another Bluetooth device. • Channel 2 is for intercom functionality between two wireless Bluetooth BHS-600 headsets. • If you want to change the Bluetooth device on channel 1, you have to switch off the fi rstly connected Bluetooth unit before you can connect it to another Bluetooth device.
-
Page 21: Functions
(Please consider your local laws/road traffi c regulations). 2) Both headsets, BHS-500 & 600, enbable automatic call acceptance with your mobile phone. Please make sure that this functionality is also activated in your phone menu. Otherwise thisfunctionality will not work. - Page 22 Important notes • Please study your mobile phone manual to make sure that your phone supports voice dialing. • If the connection between headset and mobile phone is interrupted because of an extremly long distance between these two devices, the headset will autimatically try to reconnect the systems within the next 30 minutes as soon as the two devices get nearer than 10 meters.
-
Page 23: Play Music
3.) Play music 1) Listening to music through mobile phone a) Connect your headset with your mobile phone. b) Activate the music function of your mobile phone. Please refer to the manual of your mobile phone as well. c) To stop the music, press both buttons, „-“ & „+“, for three seconds at the same time. d) To start the music, press both buttons, „-“... -
Page 24: Intercom Functionality
4.) Intercom functionality (only BHS-600) a) After you connected both BHS-600 headsets, you can use the intercom functionality. b) To stop the conversation, press both buttons, „-“ & „+“, for 1 second at the same time. c) To go on with the conversation, press both buttons, „-“ & „+“, for 2 seconds at the same time. 5.) Intercom functionality while listening to music (only BHS-600) a) Connect channel 1 with your mobile phone or audio device and activate the music. - Page 25 2) Receiving a call during listening to music through another stereo-audio-device You have the possibility to connect one Bluetooth mobile phone and one stereo-audio-device on channel 1 of your BHS-500 & 600 headset which you can use at the same time. a) Connect your mobile phone with your headset.
- Page 26 Important notes to 6/2 • The music on your audio device can be automatically activated again, if you press the „T“ button to fi nish the call. • If you want to connect a mobile phone & audio device to one channel at the same time, please note that you have to use a stereo-audio-device only.
-
Page 27: Battery Recharge Time
7.) Incoming call during intercom conversation (only BHS-600) a) Connect two headsets like described on page 43. b) Connect your phone with your headset (channel 1). c) If you receive an incoming call, the intercom functionality will be interrupted during the call. d) After the call is fi... -
Page 28: Headset Specifications
Specifi cations of BHS-500 & BHS-600 Name Wireless data communication system (BHS-500 / BHS-600) Bluetooth version Frequency 2,4022 ~ 2,480 MHz Transmission output 0,25 ~ 2,5 mW Wireless distance Up to 10m Dimensions (WxHxD) 51 x 90 x 20,5 Weight... - Page 29 Printed in Korea...