Connect To Any Display With A/V Inputs - MedeaWiz DV-66 User Manual

Connect to Any Display with A/V Inputs

Step 1: Unpack Your DV-66
Remove the packing material and the plastic bag from outside
of DV-66.
Caution: DO NOT plug in the power before Compact Flash Card is inserted
into DV-66 card slot. MedeaWiz recommends that Compact Flash Card to
be inserted into the slot first, and then the power can be applied to the
unit as described later.
Step 2: Setting Up the A/V Cable
1 Plug in the modular end of
A/V cable to the jack located at
the side of DV-66.
2 Plug in the yellow end of the A/V
cable to "Video In," white end to
"Audio L," and red end to "Audio R"
of your display.
Note: Normally the A/V inputs are
located in the back of a TV or monitor.
For more instructions on how to use
A/V input on your display,
consult the manual for the device.
3 Turn on the power of the display,
and change the channel to
the corresponding A/V input channel
if necessary.
- 5 -