Removing the Rear Pedestal from the TV
Be sure to remove the Rear Pedestal in the following
way when using the wall-hanging bracket or repacking
the TV.
1 Pull out the cover from the Rear Pedestal.
2 Remove the assembly screws
3 Lift up the TV at a slight angle from the Rear Pedestal
as shown.
(View from the side)
4 Attach the cover to the Rear Pedestal.
●
When using the wall-hanging bracket, remove the
Front Pedestal as well.
8
English
from the TV.
A
(p. 21)
Connections
●
External equipment and cables shown are not
supplied with this TV.
●
Please ensure that the unit is disconnected from the
mains socket before attaching or disconnecting any
cables.
●
Check the terminal type and cable plugs are correct
when connecting.
●
Use a fully wired HDMI compliant cable.
●
Keep the TV away from electronic equipment (video
equipment, etc.) or equipment with an infrared sensor,
otherwise distortion of image / sound may occur or
operation of other equipment may be affected.
●
Please also read the manual of the equipment being
connected.
Terminals
1
5
6
1 SD Card slot
2 USB 1 - 3 port
3 HDMI1 - 3
(p. 9, 10)
4 DIGITAL AUDIO OUT
5 ETHERNET
(p. 9)
6 Aerial terminal
(p. 9)
7 AV (COMPONENT / VIDEO)
8 HDMI4
2
3
4
7
8
(p. 10)