Bluetooth
No SIM card
Wlan Open status and signal
strength display
1.3 Installing the SIM card and battery
1.4 Installing the memory card
1.5 Battery charge
Using the Travel Charger
(1)
The battery is loaded correctly phone.
(2)
the charger plug into the phone's charging port,
travel charger and then received a standard
power
outlet.
disconnect the charger with standard electrical
outlet, and then disconnect the phone and
charger connection.
1.6 Startup and shutdown
1.6.1 Startup
About three seconds to boot holding [switch to Key]
1.6.2 Shutdown
Holding [switch to Key] about three seconds, then
touch Power off.
Charging
is
completed,
2.
Call functions
2.1 Make a call
(1)
In the standby interface, the click-to-Phone
icon into the dial pad, enter the area code and
phone number.
(2)
Click the dialing icon, and then choose to use
the SIM 1 or SIM 2 call.
2.2 To answer or reject a call
2.2.1 Answer an incoming call
There is an incoming call, slide to the right
<answer> key to answer.
2.2.2 Reject a call
Slide to the left <hang up a call key> may refuse to
answer.
2.3 Adjust the volume
Adjust the earpiece volume during a call, press the
side buttons.
2.4 End the call
When you need to end the call, the first to wake up
the screen and then click <End key> hang up
3.
Backup
The mobile phone and the SD card of data backup
and recovery
6