Linn Lingo Owner's Manual
  1. Manuals
  2. Brands
  3. Linn Manuals
  4. Turntable
  5. Lingo
  6. Owner's manual

Linn Lingo Owner's Manual

Hide thumbs Also See for Lingo:
Table of Contents

Advertisement

Quick Links

O w n e r 's M a n u a l

Advertisement

Table of Contents
loading

Related Manuals for Linn Lingo

Summary of Contents for Linn Lingo

  • Page 1 O w n e r ’s M a n u a l...
  • Page 3 Mains plug replacement: Should your mains plug need replacing and you are competent to do this proceed as follows. If you are in doubt contact your Linn retailer or a competent electrician. a) Disconnect the plug from the mains supply.
  • Page 4 Mains plugs: This appliance is supplied with a n on rewireable mains plug for the intended country. Replacement mains leads can be obtained from your Linn dealer. Should you need to change the plug please dispose of it carefully. A plug with bared conductors is dangerous if engaged in a live socket.
  • Page 5 If your LP12 was not manufactured with the LINGO kit, the Linn LINGO upgrade kit should be fitted to your deck at home by an authorised linn dealer. If this is impossible the deck should be taken to your dealer...
  • Page 6 CONNECTION To connect the LINGO to the LP12, hold the 8 pin din plug by the black plastic portion and push into the 8 pin din socket on the LINGO back panel, until the aluminium lock ring snaps into lock.

  • Page 7: Cardboard Box

    TOP SPACER CARDBOARD LAYER PAD TONEARM, ARM LEAD COUNTERWEIGHT, INNER PLATTER TOP TRAY INTERMEDIATE SPACER TURNTABLE FELT MAT OUTER PLATTER BELT BOTTOM TRAY CARDBOARD BOX...

  • Page 8: Speed Selection

    The hum filed from this transformer is extremely low; however, care should be taken not to position the LINGO too close to signal leads or preamp. Your dealer should be able to help you get the best position.
  • Page 9 TURNTABLE MAINTENANCE The LP12 is designed for a long operational life. To preserve the appearance and maintain the performance of your deck, you should note the following points. PLINTH The plinth is constructed from solid kiln-dried hardwood and should not therefore be subjected to extremes of temperature or direct sunlight.

  • Page 10: Speaker Placement

    It is important that the stylus is kept scrupulously clean. The traditional soft stylus brush is completely useless. We have found dry vibrating pad cleaners to be effective devices. Alternatively Linn Dealers can supply cleaning paper which is easy to use and gives excellent results.

  • Page 11: Guarantee And Service

    For full warranty details, please refer to the card enclosed. If you are in any doubt, please contact your nearest Linn dealer. For information on your nearest dealer, contact the Linn factory in Scotland or your national distributor.
  • Page 12 Set the correct voltage on the voltage selector in the mains input module, and snap the filter shut. Tick off the appropriate box next to the right fuse on the LINGO bottom-label and DISCARD the two incorrect fuses.
  • Page 14 PACK 461/2...

Table of Contents