Microdigital WTX-1200A User Manual
  1. Manuals
  2. Brands
  3. Microdigital Manuals
  4. Control Unit
  5. WTX-1200A
  6. User manual

Microdigital WTX-1200A User Manual

Advanced ptz controller
Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Table of Contents

PTZ Controller
Advanced PTZ Controller
User's Manual

Chapter 1. Introduction

V1.06-n017
This document contains preliminary information and subject to change without notice.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WTX-1200A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Microdigital WTX-1200A

  • Page 1: Chapter 1. Introduction

    PTZ Controller Advanced PTZ Controller User’s Manual Chapter 1. Introduction V1.06-n017 This document contains preliminary information and subject to change without notice.

  • Page 2: In This Manual

    Chapter 1 Introduction In This Manual Overview : This manual covers the operation of the WTX-1200A keyboard. WTX-1200A keyboard This remote keyboard is an accessory for PTZ dome camera, etc It allows the user to control from 1 to 255 camera.
  • Page 3 Chapter 1 Introduction Hardware Overview Hardware This remote keyboard contains easy to use control keys on the front and simple input and output connectors on the back. Components Control Buttons & This unit provides the primary operator interface. Most operations are one connection or tow button presses.
  • Page 4 Number Button Description F1 – MENU/AUTO : Function Keys (Preset, Tour, Pattern, Scan, Auto) Function keys MENU : Used for Camera(Pan/Tilt) Menu adjustment Camera Focus Control Camera Zoom Control MOUSE ON/OFF (Mouse Function Key 2-3 Seconds push) Mouse Character Description will be display Number Button Description...
  • Page 5 System Configuration and Wiring Basic Use the Keyboard Configuration when only one keyboard is connected to the controlled units. Connect the RS-485 output port of Remote keyboard to Installation RS-485 input port of the first controlled unit using the terminal block.

  • Page 6: Chapter 2 System Installation & Typical Applications

    Chapter 2 System Installation & Typical Applications System Installation Keyboard Installation Before you start the keyboard equipment to your system, make sure the units to be controlled are completely installed and everything is working correctly. Before use of this keyboard, you should set the protocol and baud rate (2.4 ~ 57.6kbps) in the PTZ SETUP mode.
  • Page 7 Main Setup Main Setup Main Setup mode, Select 2 + , (2~3 seconds) Setup screen allows you to make change each programmable clause. Note: The baud rate must be the same between the controlled unit and the keyboard.
  • Page 8 Joystick Calibration It is for the keyboard to set the Max. movement of joystick. Calibration method : Joystick move {Position Value} +...
  • Page 9 Easy Setting Function {E.S.F} Easy Setting Function (Number key + Function key) Number key + PSET/TOUR/PATT/SCAN/E.S.F Is current postion data(pan, tilt, focus, zoom data) save or call Dome memory Specifications WTX – 1200A Model Interface : RS – 485 (Tx 3 port, Trx 1 port) P Keyboard Communication An/Tilt operating distance : 4700 ft(1029m) No 24 AWG wire...

Table of Contents