Required Tools
All disassembly procedures can be performed using the following tools:
n
Philips screwdriver
Disassembly Instructions
This document contains step-by-step disassembly instructions for the FlexATX Chassis. The
instructions are clarified by images of the part that is being removed or disassembled.
Furthermore, the screws that are removed are shown next to the image of the parts
themselves.
When disassembling the system unit, follow these general rules.
n
Do not disassemble the system into parts that are smaller than those
specified in the instructions.
n
Label all removed connectors. Note where the connector goes and in what
position it was installed.
n
Turn off the power and disconnect all power and all options.
Electrostatic discharge can damage computer components.
Discharge static electricity by touching a metal object before
Reassembly Instructions
Reassembly is the reverse of the disassembly process. Use care to ensure that all cables and
screws are returned to their proper positions.
removing the system unit cover.
Disassembly and Reassembly - 2