Damage evident upon receipt should be noted on the freight bill. Damage should be brought to the attention of the delivering carrier -- NOT to McLean Thermal -- within 15 days of delivery. Save the carton and packing material and request an inspection. Then file a claim with the delivering carrier.
INSTALLATION INSTRUCTIONS 1. Inspect heat exchanger. Verify functionality before mounting the heat exchanger, see TESTING THE HEAT EXCHANGER on page 3. 2. Determine if the unit is to be surface or recess mounted. Using the appropriate cutout dimensions shown in this manual, prepare the enclosure opening for either surface or recess mounting. 3.
TX23 DC Model Drawing CONTROLLER LED’S #10-24 MOUNTING (20) (10 ON BACK FACE - 10 AC HEATER DETAIL “A” BEHIND FRONT COVER) POWER SCALE .500 SEE DETAIL “A” IMPELLER POWER AND ALARM INTERFACE ENCLOSURE AIR IN AMBIENT AIR OUT REMOVEABLE HANGING TABS (2) ENCLOSURE...
TX33 DC Model Drawing #10-24 MOUNTING (24) DETAIL “A” (12 ON BACK FACE - 12 AC HEATER SCALE .500 CONTROLLER BEHIND FRONT COVER) POWER LED’S SEE DETAIL “A” IMPELLER POWER AND ALARM INTERFACE ENCLOSURE AIR IN AMBIENT AIR OUT REMOVEABLE HANGING TABS (2) ENCLOSURE...
TX38 DC Model Drawing CONTROLLER DETAIL “A” LED’S #10-24 MOUNTING (28) SCALE .500 (14 ON BACK FACE - 14 AC HEATER BEHIND FRONT COVER) POWER SEE DETAIL “A” IMPELLER POWER AND ALARM INTERFACE ENCLOSURE AIR IN AMBIENT AIR OUT REMOVEABLE HANGING TABS (2) ENCLOSURE...
TX52 DC Model Drawing CONTROLLER AC HEATER #10-24 MOUNTING (32) DETAIL “A” LED’S POWER (16 ON BACK FACE - 16 SCALE .500 BEHIND FRONT COVER) SEE DETAIL “A” IMPELLER POWER AND ALARM INTERFACE ENCLOSURE AIR IN AMBIENT AIR OUT REMOVEABLE HANGING TABS (2) ENCLOSURE...
TX23 Components List Part Number Part Description 24VDC 48VDC 115VAC 230VAC Air Movers 10-1091-64 10-1091-55 12-1012-01 12-1012-02 Controller, Generic (may vary w/options) E117E004 E117E004 Thermostat 10-1061-16 10-1061-16 Service Cord / Harness 09-3001-89 09-3001-89 52-6035-138 52-6035-139 TX33 Components List Part Number Part Description 24VDC 48VDC...
TROUBLE SHOOTING AC Units Basic Trouble Shooting Check List 1. Check manufacturer’s nameplate located on the unit for correct power supply. 2. Unit blows fuses or breakers. • Under sized fuse/breaker or not time delayed Repair or Replace defective part •...
TROUBLE SHOOTING DC Units Basic Trouble Shooting Check List 1. Check manufacturer’s nameplate located on the unit for correct power supply. 2. Unit blows fuses or breakers. • Under sized fuse/breaker or not time delayed Repair or Replace defective part •...
WARRANTY Pentair Technical Products warrants that the Goods manufactured by Pentair Technical Products will be free from defects in material and workmanship for a period of one (1) year from the date of shipment by Pentair Technical Products, subject to the following conditions and exclusions: A.
1. Complete Model Number, Serial Number and description of damaged unit being returned. 2. Original Buyer Purchase Order number and date product was received by Buyer. 3. Quantity to be returned and a brief description of failure for each unit, if different. 4.
Need help?
Do you have a question about the CLIMAGUARD TX23 and is the answer not in the manual?
Questions and answers