Samsung Galaxy Note 4 SM-N910C User Manual page 124

Table of Contents

Useful apps

Starting Smart Remote

Tap Smart Remote on the All apps screen.

Tap Select country or region and select a country, region, and broadcast service.

Tap Personalise, tick your favourite genres and sports, and then tap Next.

Tap Age or Gender to set your profile, and then tap Done.

Tap → Continue.

Select the TV brand.

To connect the device to a projector and use the device as a remote control, tap

To connect the device to a projector and use the device as a remote control, tap I have a

projector.

Ensure that the device's infrared port is facing the TV and tap TV. Then, tap Yes, this code

Ensure that the device's infrared port is facing the TV and tap

1 works if the device turns on the TV.

If the device does not turn on the TV, tap Send this code 1 again or No, test next code 2,

If the device does not turn on the TV, tap

and then repeat this until the TV recognises the signal.

Select a channel source.

Using the device as a remote control

You can turn the TV on or off, browse channels, or adjust the volume level on the TV using the

device as a remote control.

Tap Smart Remote on the All apps screen.

Select a category at the top of the screen.

Face the device's infrared port to the TV, select a TV programme, and then tap WATCH ON

TV.

The selected programme will be shown on the connected TV.

Send this code 1 again

124

Table of Contents

Show Quick Links

Table of Contents