Panasonic SC-HT335 Operating Instructions Manual page 23

SUBWOOFER
LEVEL
You can adjust the amount of bass. The unit automatically selects
the most suitable setting according to the type of playing source.
Press [SUBWOOFER LEVEL].
≥[DVD-V] [RAM] [DVD-RW[‹VR›]
SUB W 4 (factory preset)>SUB W 1>SUB W 2>SUB W 3
^---------------------------------------------------------------------------------------}
≥When another source is selected
SUB W 2 (factory preset)>SUB W 3>SUB W 4>SUB W 1
^----------------------------------------------------------------------------------------}
DTS TG
D
PL
C D
HDCD
DVD
RAM RND
The setting you make is retained, and recalled every time you play
the same type of source.
TEST
SHIFT
3
This is one of the ways to get appropriate surround effects.
Preparation
Press [DVD/CD].
1
While stopped and no on-screen display is shown
Press [SHIFT]i[TEST] to output a test
signal.
L: Front left
RS: Right surround
≥There is no output from SW (subwoofer) channel.
2
Press [VOLUME, r] or [s] to set the
volume level normally used for listening.
3
Press [3] (increase) or [4] (decrease) to
adjust the speaker level for each speaker.
C, RS, LS: j6 dB to i6 dB
(L, R: Only the balance is adjustable.)
≥To adjust the balance of the front speakers
While outputting the test signal, press [2, 1].
≥Adjust the speaker level to the same level as the front
speakers.
To stop the test signal
Press [SHIFT]i[TEST] again.
Downloaded from www.Manualslib.com
Subwoofer level
D X MPEG4 D.MIX SLP MONO ST CT
iv
PGM PRG RDS PS PTY TUNED
Speaker level adjustments
C: Center R: Front right
LS: Left surround
manuals search engine
∫ To adjust speaker level during play
(Effective when playing multi-channel audio or when Dolby Pro
Logic II is on.)
1
Press [SHIFT]i[CH SELECT] to select the speaker.
# # # # #
L C R RS LS SW
^--------------------------------------------------}
SW: Subwoofer
≥You can adjust SW only if the disc includes a subwoofer
channel.
≥"SW" does not appear on the display and is not adjustable
when Dolby Pro Logic II is turned on.
2
Press [3] (increase) or [4] (decrease) to adjust the
speaker level for each speaker.
C, RS, LS, SW: j6 dB to i6 dB
(L, R: Only the balance is adjustable.)
≥To adjust the balance of the front speakers
While "L" or "R" is selected, press [2, 1].
RQT8291
23