Subscribe to Our Youtube Channel
Summary of Contents for POS Tablet Star TSP 143
- Page 1 Setting-up the Star TSP 143 LAN Printer + WiFi Power Pack Note: The WiFi Power pack is an additional piece of inexpensive hardware that turns Star LAN/ Ethernet printers into WiFi printers. No more messy cables! 1. Identify the parts of the printer...
- Page 2 2. Connect Cables and Peripherals 1) Remove clear plastic covering from the back of the wireless router 2) Plug the DK power module to USB cable into the DK power modules’s USB port 3) Plug the DK power module into the mini USB port of the wireless router 4) Use the provided double-sided tape to stick the DK power module and the wireless router to the back of...
- Page 3 5. Connect the Printer to your existing WiFi network Go to settings on your iPad and connect to the newly created Starwifi network (via WIFI) 1) Open web browser and type in IP of the TP Link router (192.168.0.254) Login as: admin Password is: admin 2) Select ”Quick Setup”...
-
Page 4: Troubleshooting
6) Reboot router to save changes Troubleshooting STAR TSP143LAN Printer – Not Acquiring an IP STAR TSP143Lan Printers sometimes do not acquire an IP, this is especially prevalent with the STAR WIFI Power Pack. Out of the box the STAR TSP143LAN has 20 seconds to acquire an IP or it will time out and not try to attempt to acquire an IP again until power cycled.
Need help?
Do you have a question about the Star TSP 143 and is the answer not in the manual?
Questions and answers