Specifications - ETC VCC-28 Installation Manual

Usb desktop audio device
Table of Contents

Advertisement

RJ-9 Four wire (stranded) Satin Cord Pin Out
RJ-25 Six wire (stranded) Satin Cord Pin Out
NOTE: The gain settings on the Plantronics CA12CD base need to be set at:
Endorsement of ETC or ETC's products is not implied by use of other companies' product names.
To ensure highest quality, ETC reserves the right to change product specifications at any time.
Windows® is a registered trademark of Microsoft Corporation in the United States & other countries
Linux® is a registered trademark of Linus Torvalds
WAVE® is a registered trademark of Twisted Pair Solutions
Plantronics® is a registered trademark of Plantronics, Inc.
VCC-28 Installation Guide with WAVE

Specifications

Weight: 2.75 lbs
Dimensions: 8.25"L x 6.25"W x 2"H (chassis only)
Frequency Response: 200 Hz – 8 KHz @ -3db
Distortion: .05% at max output
USB Powered
tab up – tab down
(known as
Pin 1 Black
Pin 2 Red
Pin 3 Green
Pin 4 Yellow
tab up - tab down
(known as
Pin 1 Blue
Pin 2 Yellow
Pin 3 Green
Pin 4 Red
Pin 5 Black
Pin 6 White
• Microphone Volume = 2
• Head Set Volume = 4
(switches are on the bottom of the base)
Page 32 of 33
)
Pin 1 Black
Pin 2 Red
Pin 3 Green
Pin 4 Yellow
)
Pin 1 Blue
Pin 2 Yellow
Pin 3 Green
Pin 4 Red
Pin 5 Black
Pin 6 White
Essential Trading Systems Corp.

Advertisement

Table of Contents
loading

Table of Contents