BMW 323i Owner's Manual page 96

4. Select "Lighting" and press the controller.
5. Select "Auto. headlamps" and press the
controller.
6. Select a menu item:
> "Sensitive"
> "Normal"
> "Slower"
7. Press the controller.
Pathway lighting
If you activate the headlamp flasher after park-
ing the car, with the lights switched off, the low
beams come on and remain on for a certain
time.
You can adjust the operating period or deacti-
vate the function.
1. Open the start menu.
2. Press the controller to open the menu.
3. Select "Vehicle settings" and press the
controller.
94
Online Edition for Part-No. 01 41 0 012 355 - © 03/06 BMW AG
4. Select "Lighting" and press the controller.
5. Select "Pathway lighting" and press the
controller.
6. Turn the controller to select the corre-
sponding duration.
7. Press the controller to apply the setting.
Daytime driving lamps
If desired, the light switch can remain in the
Lamps off position or the Parking lamps posi-
tion.
In the Lamps off position, the exterior lamps are
automatically switched off after the vehicle is
parked. In the Parking lamps position, the park-
ing lamps come on after the ignition is switched
off.
If necessary, switch on the parking lamps as
described in the section about parking lamps.
Activating/deactivating daytime
driving lamps*
1. Open the start menu.
2. Press the controller to open the menu.
3. Select "Vehicle settings" and press the
controller.
4. Select "Lighting" and press the controller.