SoftBank 931SH Manual page 303

Initiating S! Circle Talk
Follow these steps to send S! Circle Talk
requests to members:
Set My Status to Online first (P.17-3).
1
MENU or % S
Communication S S! Circle
Talk
2
Select member or Group S
Call or %
. S! Circle Talk starts when request is
accepted by a receiver.
Direct Entry
Enter phone number S Call or % S
Call S! Circle Talk S Call or %
Advanced
0
(Disabling Loudspeaker (Exiting S! Circle Talk for incoming calls (P.17-10)
S! Circle Talk Operations
[ Speaking
1
Press and hold ! when
Press and Hold e appears
S You have the floor
. e:My Turn appears when you have
the floor.
2
Keep holding ! to speak
S Release ! S Floor is
released
. Warning tone sounds before time
limit.
Canceling Loudspeaker
During S! Circle Talk, A or %
, To reactivate, follow these steps:
D or % S While message appears,
OK or %
S! Circle Talk
[ Exiting S! Circle Talk
1
# or " S Connection
ends
. S! Circle Talk ends automatically
when there is only one participant
left, including yourself.
Rejoining S! Circle Talk
& or ! S Highlight tab (log type)
S Highlight record S Options or
B S Rejoin Circle Talk
, An error message appears when S! Circle
Talk has ended or maximum number of
participants are already engaged.
Accepting S! Circle Talk Request
1
While handset is ringing/
vibrating, Answer or % S
S! Circle Talk starts
. S! Circle Talk Operations: left
17
7
17-