Humminbird 698ci HD SI Combo Operation Manual page 68

Screen Snapshots
Screen Snapshots are saved pictures of the view on the screen. The screen
snapshot will include the menus, dialog boxes, warnings, and messages that
were active when the screen snapshot was taken. Saved Screen Snapshots can
be viewed from the Snapshot and Recording View or Chart View.
The Screen Snapshot feature is available when an optional-purchase SD
memory card is installed and Screen Snapshot is On (see Setup Menu Tab:
Screen Snapshot).
Make a Screen Snapshot
Delete a Screen Snapshot
NOTE: Navigation is not affected by the Screen Snapshot feature. Also, if
Screen Snapshot is enabled, but a GPS receiver is not connected, pressing
the MARK key will capture the screen image but an error will display that
says a GPS position fix is required to create a waypoint.
Views
Make a Screen Snapshot:
1. Activate Screen Snapshot and
Waypoint saved
2. From any view or cursor location
at Cursor
Location
Screen Snapshot
Confirmation
A waypoint will also be created at
the boat or active cursor location.
File Name
The screen snapshot shares the
same file name (.PNG).
Delete a Screen Snapshot:
1. From the Snapshot and Recording
From Snapshot
and Recording
View, select
Delete Image
from the
2. Press the MENU key once, and
X-Press™ Menu.
3. Press the RIGHT Cursor key.
56
install an SD memory card.
you want to capture, press the
MARK key. The screen will pause
while the image is saved.
View, press the UP or DOWN
Cursor keys to scroll through the
saved files and highlight a
snapshot file.
select Delete Image from the
X-Press™ Menu.