Esd Protection - Nokia 1508I Service Manual

Hide thumbs Also See for 1508I:

Table of Contents

4. ESD PROTECTION

Nokia requires that service points have sufficient ESD protection (against static

electricity) when servicing the phone.

Any product of which the covers are removed must be handled with ESD

protection. The SIM card can be replaced without ESD protection if the product

is otherwise ready for use.

To replace the covers ESD protection must be applied.

All electronic parts of the product are susceptible to ESD. Resistors, too, can be

damaged by static electricity discharge.

All ESD sensitive parts must be packed in metallised protective bags during

shipping and handling outside any ESD Protected Area (EPA).

Every repair action involving opening the product or handling the product

components must be done under ESD protection.

ESD protected spare part packages MUST NOT be opened/closed out of an ESD

Protected Area.

For more information and local requirements about ESD protection and ESD

Protected Area, contact your local Nokia After Market Services representative.

Confidential

1508i RM 430

Service Manual Level 1&2

ISSUE 1

Table of Contents