Place this card in a visible spot close to the consumer unit.
Heater Location _________________________
Total Wattage __________________________
Attention:
Do not cut or shorten the heating element.
Ensure that the entire heating elements including the joints are installed under the
tiles in the installation.
The Heating element must be used in conjunction with a 30mA RCD.
Heater Model
Date
This form must be completed as part of the Warmup Guarantee. Ensure that
the values are as per the instruction manual.
This card must be situated close to the consumer unit in a visible place.
Note: Draw a Plan showing the layout of the heater.
Warmup Plc 702 Tudor Estate Abbey Road London NW10 7UW T: 0845 345 2288 F: 0845 345 2299 www.warmup.co.uk
Resistance Before
Signed
Radiant Floor Heating Systems
Warming-Risk of electric shock
Electric-wiring and heating panels
contained below the floor. Do not
penetrate with nails, screws, or similar
devices. Do not restrict the thermal
emission of the heated floor.
Resistance After
Company stamp/name
CAUTION
Insulation Resistance
Need help?
Do you have a question about the undertile heating mat and is the answer not in the manual?
Questions and answers