Analog Configuration Guide
The SD| Greed supports an array of configurations that can be selected by using the "Analog output signal type" selector
and the "Input signal type" selector.
Numerous combinations are available. In general any of the analog video connectors that are not used as inputs can be
used as outputs. Therefore the table below is arranged to show which output signal types will be available given the output
signal type that will be used.
For a detailed Color Guide please refer to the SD| Greed Cable guide included in your
SD| Greed box or refer to this manual "SD| Greed Cable Connection Guide".
SD| Greed Analog and Digital I/O Configurations and Labeling Guide
Input Type
Output Configurations
Digital
SDI
SDI Video + Key
SDI Video + Video
DVID 3 or DVID 4
Component
SDI Video + Key
SDI Video + Video
S Video
SDI Video + Key
SDI Video + Video
Composite
SDI Video + Key
SDI Video + Video
Analog Set 1
Component/RGB
(AVID 1,2,3)
Component/RGB (AVID 1,2,3)
Or
Composite & (AVID 1)
S Video (AVID 2,3)
Component/RGB (AVID 1,2,3)
Or
Composite (AVID 1) &
S Video (AVID 2,3)
Component/RGB (AVID 1,2,3)
Or
Composite (AVID 1) &
S Video (AVID 2,3)
Analog Set 2
Composite (AVID 4)
S Video (AVID 5,6)
Input
Component (AVID 4, 5,6)
Input
S Video (AVID 5,6)
Input
Composite & (AVID 4)
46