Advertisement
Before First Use
Set the Browning Control (5) to grade 3.
Allow the toaster to run through the toasting cycle without using any bread in it. The toaster may
smoke, but this is perfectly normal as the protective finish on the elements burns off. Ensure you are
in a well ventilated area when you do this.
Using Your Toaster
1. Place the toaster upright on a flat, stable, heat-resistant surface.
2. Ensure that the toaster is not touching or near anything that can be damaged by heat.
3. Plug the toaster into the power socket and switch on. Make sure that the power lead cannot be caught easily or
does not overhang.
4. Turn the Timer Set Browning Control dial (5) to the required setting. The chart below shows recommended
settings.
Grades
Bread type
1 – 3
Thin Bread Slice
3 – 5
Regular Bread Slice
5 – 6
Thick / Frozen Bread Slice
5. Put the bread into the toasting slots and press the bread carriage lever (1) fully down.
The lever won‟t stay down unless the toaster is connected to the electricity supply.
6. When the toaster has finished the toasting cycle, the bread carriage lever will pop up allowing you to remove
the bread from the toaster. The toasting cycle can be stopped before it has finished by pressing the Stop
Button (2).
Frozen Bread
This function allows you to toast frozen bread easily as the time is automatically altered to give you the same
degree of browning you would get with unfrozen bread.
Leave the Timer Set Browning Control (5) at your usual setting. Press the bread carriage lever down and then
press the Frozen button (3). The indicator light will light up to show the toasting time has been altered.
Never try to defrost frozen bread in the toaster on a low heat setting as this will cause water to drip into the
toaster. Toasting frozen bread changes the ice into steam which escapes out of the slots.
IG3001 – 2 Slice Toaster at a Glance
4
Advertisement
