Weiita Sparker F8455 User Manual

Weiita Sparker Tactical Flashlight
USER MANUAL
IMPORTANT: Read this manual before
using the ashlight
CAUTION: NOT recommended for use
by children
Operation
(1) Install battery
(i) Install 18650 Li-ion rechargeable battery
adapter
Insert one (1) 18650 Li-ion rechargeable battery
along with the 18650 battery adapter into the
ashlight. Be advised that the "+" end should
battery (-)
face the head end of the ashlight. Backwards
installation can damage the LED bulb.
(ii) Install AAA batteries
Put three (3) AAA batteries into the AAA battery
adapter. The "-" end of each AAA battery should
face the spring on the adapter. Insert the
battery
adapter into the ashlight. The arrow sign on
cell
the adapter indicates the direction. Backwards
installation can damage the LED.
(2) Change light mode
Press tail switch to turn ashlight on and o .
When the ashlight is ON, half press the switch
and then release to cycle through the light
modes in the following sequence:
(3) Adjust light beam
Rotate the ring on the head of the ashlight to
adjust from a ood beam to a spotlight.
2
Model #: F8455
High/Low/Strobe.
Product Overview
The Sparker F8455 tactical ashlight comes equipped with the
CREE Q5 LED bulb which can produce an output brightness of up to
300 lumens. The professionally designed focus system can adjust
the beam from a wide ood light to a narrow straight beam. The
durable body is made of aircraft grade aluminum alloy, which
ensures the ashlight shock-proof and weather-proof. The
ashlight uses one 18650 Li-ion high power rechargeable battery,
and it can also be powered with three AAA batteries.
We highly recommend you to register your
www.weiita.com/register.html.
Included in the Box
(4) Charge 18650 Li-ion rechargeable battery
WARNING: Charge only rechargeable Li-ion batteries. Charging any other type of
rechargeable or non-rechargeable (disposable) batteries may cause leakage or
explosion, which may damage your body or charger.
Pull back the latch and insert the battery. Make sure that "+" end
faces the right direction as indicated on the charger. Be advised that
backwards installation can damage the battery and charger.
Maintenance
• If flashlight is used less than once a month, remove the batteries
between uses to prevent slow discharge.
• To maximize the lifespan of the Li-ion rechargeable battery, please
charge the battery before it is completely out of power.
• It is suggested to lubricate all threads and rubber O-rings with
petroleum jelly twice yearly.
• If the rubber O-ring is worn out after long periods of use, replace
the O-ring with a new one to keep the light properly sealed.
• Inspect flashlight monthly and carefully remove any damaged
batteries and clean any corrosion.
• Please don't disassemble the sealed head, doing so can cause
damage to the light and will void the warranty.

Troubleshooting

If ashlight does not turn on or stay on, please rst make sure the
battery is working and replace the battery if needed. If the problem
is not solved, then check if the tail cap and spring assembly are
ashlight online at
1
3