Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for IDTECH VersaKey
Summary of Contents for IDTECH VersaKey
- Page 1 VersaKey Compact Programmable Keyboard Quick Start Manual...
-
Page 2: Fcc Warning Statement
FCC WARNING STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. -
Page 3: Limited Warranty
ID TECH is a registered trademark of International Technologies & Systems Corporation. VersaKey and Value through Innovation are trademarks of International Technologies & Systems Corporation... - Page 4 HID interfaces. VersaKey product with a USB-keyboard configuration always sends keyboard and MagStripe data in scan codes format so that the MagStripe data appears as if they were from a keyboard. For USB-HID device, VersaKey communicates MagStripe data in ASCII characters through the USB cable, allowing the VersaKey to serve separate keyboard and Magstripe reader functions via a single device.
- Page 5 Section 2 INSTALLATION AND OPERATION To install the VersaKey, connect the keyboard to the PC/host device with the USB cable. When the VersaKey is powered up, it performs a self-test and initiation sequence with the computer. During the self-test, the MagStripe reader will beep.
-
Page 6: Specification
Section 3 SPECIFICATION VersaKey Keyboard Mechanical Keyswitch Total Travel 4.0 + 0.5 mm Operating Force 50 + 7g Keyboard Color Black Size 469.9 mm (L) x 203.9 mm (W) x 42.8 mm (H) Material High Impact PS, Meets flammability spec. UL94HB... -
Page 7: Smart Card Reader (Optional)
Smart Card Reader (Optional) Smart card types Microprocessor type, T=0 & T=1 Compatibility ISO 7816-1thru 6 cards. EMVCo Compliant Operating Life 1,000,000 card swipes LED (green) There is a card seated LED next to the smart card slot; the LED is on when the card is seated and powered. Touchpad (Optional) Max Tracking Speed 250 mm/s... -
Page 8: Troubleshooting
Utility. • The reader does not output data. The reader will beep when power is applied to the VersaKey. The reader will also beep for each track correctly read from a magnetic stripe. Use a known good credit card to test the reader operation. Insure that a text input application (such as Windows Notepad) is open and selected during the test. -
Page 9: Appendix A Magstripe Reader Default Settings
Appendix A MagStripe Reader Default Settings The Reader is shipped from the factory with the following magnetic stripe default settings. Default Functional Settings Function Default Value Terminal Type PC/AT (Auto Selects) Beep Volume High Character Delay 2 ms Track Selection Any Track Data Output Format ID TECH Format... - Page 10 ID TECH 10721 Walker Street Cypress, CA 90630 (714) 761-6368 80074505-001-A www.idtechproducts.com R05/09...