NorthStar Horizon User Manual page 6

¥-----------------
2.4.2 Parallel Printer
To connect a parallel printer to the HORI-
ZON requires the DB-232 cable shown in
Figure 2-6. If the appropriate cable is not
available, consult your authorized North
Star Dealer for assistance.
Press one end of the printer cable carefully
over the parallel output connector on the
back of the HORIZON (Fig. 2-7). These
connectors only match one way, so make
sure they are properly aligned.
Parallel Printer Cable
Figure 2-6
Connecting the Parallel Printer
to the HORIZON
Figure 2-7
Use the same procedure to connect the other end of this cable to the appropriate connector
on the printer. Consult the manual for the printer for the location of this canector.
6