Table of Contents
Advertisement
Quick Links
®
Product features may
vary from the picture above.
Please read this manual and save it with your original sales receipt.
Tools needed for assembly: Phillips Screwdriver, Hammer and Pliers (all not included);
Cap Nut Assembly Tool (included).
Use only with a Power Wheels
®
12 Volt Battery with Built-in Thermal Fuse
and a Power Wheels
®
12 Volt Charger (both included).
Kawasaki
®
is a U.S. trademark owned by and used under license from Kawasaki Motors Corp., U.S.A.Kawasaki Motors Corp., U.S.A. All Rights Reserved.
This product is neither manufactured nor distributed by Kawasaki Motors Corp., U.S.A. Consumer inquiries should be directed to: Power Wheels by Fisher Price
®
.
Fisher-Price, Power Wheels, Power Wheels by Fisher-Price and Power Lock are U.S. trademarks of Mattel, Inc.
www.powerwheels.com
Owner's Manual
with Assembly Instructions
For Model C7478
Advertisement
Table of Contents
Related Manuals for Fisher-Price Power Wheels C7478
Summary of Contents for Fisher-Price Power Wheels C7478
- Page 1 U.S. trademark owned by and used under license from Kawasaki Motors Corp., U.S.A.Kawasaki Motors Corp., U.S.A. All Rights Reserved. This product is neither manufactured nor distributed by Kawasaki Motors Corp., U.S.A. Consumer inquiries should be directed to: Power Wheels by Fisher Price ®...
-
Page 2: Table Of Contents
Important Information ..............2 Warnings and Caution . -
Page 3: Warnings And Caution
ELECTRICAL HAZARD • Battery can fall out and injure a child if vehicle tips over. Always use battery clamp. • PREVENT FIRE - Never modify the electrical system. Alterations could cause a fire resulting in serious injury and could also ruin the electrical system. - Use of the wrong type battery or charger could cause a fire or explosion resulting in serious injury. -
Page 4: Parts
• If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product to the store. • Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded. - Page 5 Parts Steering Bushing Handlebar Front Back Cap Nut Assembly Tool Handlebar Assembly Round Bushing - 2 Microphone 12 Volt Charger 12 Volt Battery Part Not Shown: Label Sheet #6 x 1" Screw - 6 #6 x " Screw - 2 "...
-
Page 6: Parts Diagram
Note: Some parts are assembled on both sides of the vehicle. This illustration shows assembly on right side only. Vehicle Body Cowling Seat Wheel - 4 Hubcap - 4 Cap Nut - 6 Steering Column Handlebar Neck 12 Volt Battery 12 Volt Charger Parts Diagram Microphone... -
Page 7: Battery Charging
ELECTRICAL HAZARD WARNING • Battery can fall out and injure a child if vehicle tips over. Always use battery clamp. • PREVENT FIRE - Never modify the electrical system. Alterations could cause a fire resulting in serious injury and could also ruin the electrical system. - Page 8 Important Notes • Your new battery must be charged for at least 18 hours before you use it in your vehicle for the first time. • We recommend that you start charging your battery before beginning assembly of your new vehicle. •...
-
Page 9: Assembly
WARNING Children can be harmed by small parts, sharp edges and sharp points in the vehicle’s unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the vehicle. Children should not handle parts, including the battery, or help in assembly of the vehicle. - Page 10 Motor Assembly Hubcap Rear Cap Nut Axle Cap Nut Washer Assembly Tool Rear Wheel Driver .437 Cap Nut .437" • Slide a washer onto the rear axle. • Slide the rear wheel driver onto the rear axle. Make sure the rear wheel driver fits onto the pins in the motor assembly.
- Page 11 Side Shifter Handle • Press the tab under the back of the seat and lift to remove the seat. • Make sure the motor harness wires are positioned in the channel to prevent them from being pinched between the cowling and vehicle body. •...
- Page 12 Lock Nuts • Position the handlebar upright. • Fit the handlebar neck to the undersideof the handlebar, with the holes in the handlebar and handlebar neck aligned. " screws down through the handlebar • Insert two #10 x 1 and handlebar neck. •...
- Page 13 Cap Nut Steering Column .437 Cap Nut .437" • Fit the handlebar assembly onto the end of the steering column. Make sure the handlebar grip area points towards the rear of the vehicle. • Fit a cap nut on the end of the steering column. •...
- Page 14 ® Dash and Rear View • Apply labels as shown. For best results, make sure your hands and the areas to which the labels will be applied are clean and dry. Assembly Hand Grip • Bend the plastic tip at the end of the microphone cord so that it forms a "T".
-
Page 15: Label Decoration
Proper label application will help to keep the labels looking their best! When applying labels, keep the following guidelines in mind: • Wash your hands before applying the labels. • Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils. •... -
Page 16: Battery Installation
IMPORTANT! Use only a Power Wheels with built-in thermal fuse. Use of any other battery will damage your vehicle. Make sure that you charge the battery for at least 18 hours using the enclosed Power Wheels 12 volt charger before operating your vehicle for the first time. -
Page 17: Battery Care And Disposal
Battery Care and Disposal Care If a battery leak develops, avoid contact with the leaking acid and place the damaged battery in a plastic bag. See information below for proper disposal. If acid comes in contact with skin or eyes, flush with cool water for at least 15 minutes and call a physician. -
Page 18: Rules For Safe Driving
RIDING HAZARD WARNING Prevent Injuries and Deaths • Direct Adult Supervision Required • Keep Children Within Safe Riding Areas These areas must be: - away from swimming pools and other bodies of water to prevent drownings - generally level to prevent tipovers - away from steps and steep inclines, cars, roads and alleys. -
Page 19: How To Operate Your Vehicle
How to Operate Your Vehicle As assembled, your vehicle is ready to roll in low speed (2 child is ready to drive the vehicle in high speed (5 mph, maximum), follow the instructions (step 3) to disconnect the high speed lock-out. Beginner - Low Speed Drive Shifter REMOVE LOCK-OUT... -
Page 20: Statement Of Limited Warranty
How to Operate Your Vehicle Shifter REMOVE LOCK-OUT SCREW ON SIDE OF SHIFTER FOR HIGH SPEED OPERATION IMPORTANT! To avoid damaging the motors and gears, stop the vehicle before shifting between low and high speed. • Make sure the shifter is in the HIGH SPEED position. •... -
Page 21: Problems And Solutions Guide
Problems and Solutions Guide IMPORTANT! If you experience a problem with your vehicle, first check the Problems and Solutions Guide below. If you still experience a problem, please contact Power Wheels toll-free at 1-800-348-0751 between 8 AM and 6 PM (EST) Monday through Friday. Or, contact your local Power Wheels on-line at www.powerwheels.com or call 1-800-348-0751. - Page 22 Problems and Solutions Guide Problem Short run time Undercharged battery Overcharged battery Battery is old and will not accept full charge Tripped thermal fuse Vehicle runs sluggishly Undercharged battery Battery needs charging Battery is old and will not accept full charge Vehicle is overloaded Driving conditions are too stressful Vehicle runs in low speed, but...
- Page 23 Problems and Solutions Guide Problem When the foot pedal is pressed Operation of vehicle in low speed only one rear wheel spins Sometimes the vehicle doesn’t Loose wire or connector run, but other times it does Motor or electrical switch damage When the foot pedal is pressed, Loose wire or connector the vehicle won’t run without...
- Page 24 IMPORTANT! DO NOT use this vehicle for the first time until you have charged the battery for 18 hours. Remember to… Charge the battery immediately after each use. Charge the battery once a month during storage, even if the vehicle has not been used. Failure to follow these instructions will permanently damage your battery and void your warranty.
Need help?
Do you have a question about the Power Wheels C7478 and is the answer not in the manual?
Questions and answers