E-Mail - Nokia 6681 User Manual

E-mail

Select Messaging > Options
the mailbox main view, select
and from the following:
Mailbox in use—Select which mailbox you want to use for
sending e-mail.
Mailboxes—Opens a list of mailboxes that have been
defined. If no mailboxes have been defined, you are
prompted to do so. Select a mailbox to change the
settings:
Mailbox settings:
Mailbox name—Enter a descriptive name for the mailbox.
Access point in use (Must be
Internet access point (IAP) for the mailbox. See
"Connection settings" on page 91.
My e-mail address (Must be
address given to you by your service provider. Replies to
your messages are sent to this address.
Outgoing mail server (Must be
address or host name of the mail server that sends your
e-mail. You may only be able to use the outgoing server of
your network operator. Contact your service provider for
more information.
> Settings > E-mail, or in
Options > E-mail settings,
defined)—Choose an
defined)—Enter the e-mail
defined)—Enter the IP
Copyright © 2005 Nokia. All rights reserved.
Send message—Define how e-mail is sent from your
phone. Select Immediately
mailbox when you select Send
next conn.—E-mail is sent when the connection to the
remote mailbox is available.
User name—Enter your user name, given to you by your
service provider.
Password:—Enter your password. If you leave this field
blank, you are prompted for the password when you try to
connect to your remote mailbox.
Incoming mail server (Must be
address or host name of the mail server that receives your
e-mail.
Mailbox type:—Defines the e-mail protocol that your
remote mailbox service provider recommends. The options
are POP3 and IMAP4. This setting can be selected only
once and cannot be changed if you have saved or exited
from the mailbox settings. If you are using the POP3
protocol, e-mail messages are not updated automatically
in online mode. To see the latest e-mail messages, you
must disconnect and make a new connection to your
mailbox.
Security (ports)—Used with the POP3, IMAP4, and SMTP
protocols to secure the connection to the remote mailbox.
for the device to connect to the
message. Select During
defined)—Enter the IP
57