LG 50PX4R-ZB Service Manual page 6

HDMI/
AUDIO INPUT
DVI(VIDEO)
REMOTE
CONTROL
1 2
1. HDMI(DVI VIDEO) / AUDIO INPUT / RGB INPUT
Connect the monitor output socket of the PERSONAL
COMPUTER, DVD or STB to this socket.
Note: If you want to use RGB/DVI audio, we strongly
recommend that you use the cable that has a core, or the
EMI Filter core along with separate cable.
2. REMOTE CONTROL
3. RS-232C INPUT(CONTROL/SERVICE) PORT
Connect to the RS-232C port on a PC.
4. COMPONENT INPUT
Connect DVD video outputs to Y, P
INPUT and audio outputs to Audio sockets of AUDIO INPUT.
AUDIO/VIDEO IN SOCKETS (AV4)
Connect the audio/video out sockets of external equipment
to these sockets.
S-VIDEO/AUDIO IN SOCKETS
Connect the S-VIDEO out socket of an VCR to the S-VIDEO
socket.
Connect the audio out sockets of the VCR to the audio sockets
as in AV4.
<Back Panel>
VIDEO VIDEO AUDIO AUDIO
L R
COMPONENT COMPONENT
RGB INPUT
RS-232C INPUT
(CONTROL/SERVICE)
A A V4 V4
L R
(MONO) (MONO)
S-VIDEO VIDEO S-VIDEO VIDEO
AUDIO AUDIO
3 4
, P of COMPONENT
B R
A A V1 V1
AUDIO AUDIO
L R
A A V2 V2
V VARIABLE ARIABLE
AUDIO OUT AUDIO OUT
A A V3 V3
5 6
5. VARIABLE AUDIO OUTPUT
6. EURO SCART SOCKET
Connect the euro scart socket of the VCR to these sockets.
Note:
a. If you want to use the EURO scart cable, you have to use
the signal shielded Euro scart cable.
b. If the S-VIDEO(Y/C) signal is received through the Euro
scart socket 2 (AV 2), you must change to the S-Video 2
(Y/C) mode.
7. ANTENNA INPUT
8. POWER CORD SOCKET
This Monitor operates on AC power. The voltage is indicated
on the Specifications page. Never attempt to operate the set
on DC power.
9. AUDIO/VIDEO INPUT (AV5)
S-VIDEO/AUDIO IN SOCKETS
- 6 -
A A V5 V5
S-VIDEO
9
AC INPUT
Antenna
7 8