Connect To A Computer Network And The Internet - Philips HTS9140 User Manual

Option 3: Connect audio through a digital
optical cable
Note
•
The digital optical cable or connector might be
labeled as SPDIF OUT or OPTICAL OUT.
(Cable not supplied)
Connect to a computer
network and the Internet
Connect the home theater to a computer
network and enjoy:
•
Multimedia content streamed from your
computer : view photos, play music and
watch video files streamed from your
computer (see 'Play from PC (DLNA)' on
page 18).
•
Net TV : browse Net TV services (see
'Browse Net TV' on page 19).
•
Software update : update the software of
the home theater through the network (see
'Update software from the network' on
page 24).
What you need:
•
A network router (with DHCP enabled).
•
A network cable (RJ45 straight cable).
•
A computer with media server software
installed (see 'Set up media server software'
on page 18).
•
For Net TV and software update, make sure
that the network router has access to the
Internet and is not restricted by firewalls or
other security systems.
EN
12
(Net TV feature not available in China and Latin
America)
(Cable not supplied)
LAN
TV
Set up network
1
2
3
4
5
6
7
Connect the home theater to a network
router through wired or wireless network
connection (see 'Connect a Wi-Fi USB
adapter' on page 13).
Turn on your TV and switch to the correct
source for the home theater.
Press (Home).
Select [Setup], then press OK.
Select [Network] > [Network Installation],
then press OK.
•
For wired network, select [Wired
(Ethernet)] and press OK.
• For wireless network, select [Wireless
(Wi-Fi)] and press OK.
Follow the instructions on the TV to
complete the setup.
» The home theater connects to the
internet. If connection fails, select [Retry],
then press OK.
Select [Finish], then press OK to exit.
www