1. Manuals
  2. Brands
  3. Dedicated Mircros Manuals
  4. Recording Equipment
  5. Digital Sprite 2
  6. Setup manual addendum

Dedicated Mircros Digital Sprite 2 Setup Manual Addendum

New features and amendments for ds2 models with built in cdr
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Setup Guide Addendum
New features and amendments for DS2 models with built in CDR

Advertisement

Table of Contents
loading

Summary of Contents for Dedicated Mircros Digital Sprite 2

  • Page 1 Setup Guide Addendum New features and amendments for DS2 models with built in CDR...
  • Page 2 Line OUT - RCA (phono) socket, 1V pk-pk. Data The internal CD writer in the Digital Sprite 2 is not compatible with Ultra Speed CDR’s. Ensure SCSI - 50-pin HD SCSI-2 connection. that only High Speed or Multi-Speed CDR media is used. This is normally written on the CDR - RJ-45 10-baseT Ethernet connection.

  • Page 3: Alarm Number

    These are extra relays available at the rear of the unit labelled RELAYS. Serial telemetry connections The pin-out for the RELAYS connector is as follows (view from solder side). The serial telemetry port on the Digital Sprite 2 is a screw terminal labeled ‘Bus A’. The connection is as follows: Bus A...
  • Page 4 It is also possible to disable recording of individual cameras by selecting Cameras connected to the Digital Sprite 2 can be recorded at a High, Medium (Standard) or Low Continue to select the priority of each camera, notice that the update rates are priority for day, night and weekend schedule.
  • Page 5 Quad sequence Page, Segment DS2A supports a PPP (Point to Point Protocol) connection from the RS-232 serial port 1 or 2. The sequence on a quad display can either be a page at a time, i.e. cameras 1, 2, 3 and 4, then This port allows a US Robotics modem to be connected directly to the DS2A dial-up.
  • Page 6 It may be necessary to wait a few minutes for the remaining images to be protected before Alarm protection unprotecting them. Global and Panic alarms can be protected automatically as they are received. Select whether global, Panic, or Global and Panic alarms are protected. If no alarms are to be protected, select Disabled.

  • Page 7: Activity List

    Search Setup Press Event to cancel Camera 15 The Digital Sprite 2 will search the hard disk for activity in the selected areas. Once it has Define Setup found 20 (for PAL units) or 18 (for NTSC cameras) events the activity list will appear. The...

  • Page 8: Using The Remote Control

    CDR Archive list. If the ‘Copy destination on the previous page is set to ‘External’, then the The remote control included with the Digital Sprite 2 operates the same as the front panel; see images will be copied to an external Zip or Jaz disk.

  • Page 9: Rack Mounting Kit

    Rack mounting kit A rack mounting kit is supplied with this product. It is important to use it correctly. The kit comprises of: (Rack mount screws) (Rack mount ears) (Rear support) Installation Before connecting cables to the back of the unit: Attach the rear supports to the rack.
  • Page 10 MI-A-DS2AC/E1-2 Dedicated Micros, Feb 2005...

Table of Contents