Page 2
CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET® or Chauvet). The CHAUVET® logo in its entirety including Note: Dimensions in inches rounded to the nearest decimal digit. the CHAUVET name and the dotted triangle, and all other trademarks in this Electrical Power Supply Type...
Page 3
RMA number. time to time in the content hereof without obligation of CHAUVET® to notify any person or company of such revision or changes. This does not DO NOT write the RMA number directly on the box.
Page 4
This can lead to CHAUVET®. Failure to notify the carrier in a timely manner may reduced light source life and increased mechanical wear. invalidate your claim. In addition, keep the container and all the packing To clean your product: material for inspection.
Page 5
The ÉPIX™ Drive 640 has six (6) mounting points with 10 mm holes. servicing in this User Manual applies only to properly certified CHAUVET® recommends using the following general guidelines when CHAUVET® technicians. Do not open the housing or attempt any repairs unless you are certified by CHAUVET®. mounting this product: ...
Page 6
In case of a serious operating problem, stop using this product software) Connection immediately! In the unlikely event that your CHAUVET® product may require service, For smooth-running operation, ArKaos Kling-Net requires a gigabit contact CHAUVET® Technical Support. (1000 Mbps) Ethernet card and network switch.
Page 7
ÉPIX™ Drive 640 User Manual ÉPIX™ Drive 640 User Manual Input Power The ÉPIX™ Drive 640 has an auto-ranging power supply that works with What Is One ÉPIX™ Drive 640 an input voltage range of 100~240 VAC, 50/60 Hz. ...
Page 8
ÉPIX™ Drive 640 User Manual ÉPIX™ Drive 640 User Manual Product Dimensions Product The ÉPIX™ Drive 640 is the power supply for the ÉPIX™ Strip. The ÉPIX™ Drive 640 consists of stainless steel construction. You may Description combine other ÉPIX™ Series units to create multiple numbers of configurations.
Need help?
Do you have a question about the EPIX Drive 640 and is the answer not in the manual?
Questions and answers