1. Manuals
  2. Brands
  3. BAICHUAN Manuals
  4. DVR
  5. 5400C Series
  6. User manual

BAICHUAN 5400C Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
5400C Series DVR User Manual
5400C Series DVR
User Manual
Version 1.0.1
1

Advertisement

Table of Contents
loading

Summary of Contents for BAICHUAN 5400C Series

  • Page 1 5400C Series DVR User Manual 5400C Series DVR User Manual Version 1.0.1...
  • Page 2 5400C Series DVR User Manual Preventive and Cautionary Tips Before connecting and operating your DVR, please be advised of the following tips: • Ensure unit is installed in a well-ventilated, dust-free environment. • Unit is designed for indoor use only.

  • Page 3: Table Of Contents

    5400C Series DVR User Manual TABLE OF CONTENTS PRODUCTION 1.1. Product Key Features 1.2. Operating Your DVR 1.3. Rear Panel Diagram GETTING STARTED LIVE VIEW 3.1. Watching a Live View 3.1.1. Understanding Live Preview Icons 3.1.2. Operating the Live Preview 3.1.3.
  • Page 4 5400C Series DVR User Manual NETWORK SETTINGS 8.1 Configuring Basic Settings 8.1.1 Static 8.1.2 DHCP 8.1.3 PPPoE 8.2 Configuring Advanced Settings 8.2.1 DDNS 8.2.2 8.2.3 E-mail Settings 8.2.4 FTP Settings 8.2.5 IP Filter 8.2.6 UPNP PTZ CONTROLS 9.1 Navigating PTZ Menus 9.2 Configuring PTZ Settings...
  • Page 5 5400C Series DVR User Manual 12.3.5 Viewing System Logs REMOTE SURVEILLANCE 13.1. Setup ActiveX Plug-In 13.2. Remote Live View 13.3. Remote Playback 13.4. Setup APPENDIX 14.1. Glossary 14.2.

  • Page 6: Production

    5400C Series DVR User Manual 1 PRODUCTION Thank you for your purchase of 5500E series Digital Video Recorder (DVR). To get the most out of your DVR, please read through this User Manual thoroughly. The 5500E series DVR is a new generation product.

  • Page 7: Recording And Playback

    5400C Series DVR User Manual  Supports 1 SATA HDD up to 2TB capacity.  Supports S.M.A.R.T. technology.  Use pre-allocating hard disk management technology, and no disk fragments. Recording and Playback  Supports cycle and non-cycle recording mode. ...

  • Page 8: Operating Your Dvr

    5400C Series DVR User Manual Others  Supports front panel, mouse, IR control operation.  Supports multi-level user management, each user can have individual DVR access rights.  Powerful DVR log, including operation, alarm, information and exception log.  Supports remote manual alarm output control.

  • Page 9: Using Remote Control

    5400C Series DVR User Manual Using remote control To use the remote control: 1. STANDBY: Press to turn standby mode ON/OFF. 2. Playback controls:  : Increase rewind speed 2X, 4X, 8X;  : Press to start playback;  : Press to increase fast-forward speed 2X, 4X, 8X;...

  • Page 10: Using A Usb Mouse

    5400C Series DVR User Manual Using a USB Mouse A regular 3-button (Left/Right/Scroll-wheel) USB mouse can also be used with this DVR. To use a USB mouse: 1. Plug USB mouse into one of the USB ports on the front panel of the DVR.

  • Page 11: Rear Panel Diagram

    5400C Series DVR User Manual Enter: Confirm selection. ESC: Exit out of Soft Keyboard. 1.3. Rear Panel Diagram Item Description VIDEO IN BNC connectors for analog video input. VIDEO OUT BNC connector for analog video output. AUDIO IN Connector for 4 channels audio input...

  • Page 12: Getting Started

    5400C Series DVR User Manual 2 GETTING STARTED 2.1 Starting and Shutting Down Your DVR Proper startup and shutdown procedures are crucial to expanding the life of your DVR. To startup your DVR: 1. Ensure the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an Uninterruptible Power Supply (UPS) be used in conjunction with the unit.

  • Page 13: Rebooting And Locking Your Dvr

    5400C Series DVR User Manual 2. Press the POWER switch on the rear panel to safely shutting down the system. Rebooting and Locking Your DVR While in the Shutdown menu, you may also reboot or lock your DVR. Locking your DVR will return you to the Live Preview mode, which will require an user name and password to exit out of it.

  • Page 14: Live View

    5400C Series DVR User Manual 3 LIVE VIEW 3.1. Watching a Live View The Live Preview mode is automatically started after the DVR boots up. It is also at the very top of the menu hierarchy, thus hitting the ESC multiple times (depending on which menu you’re on) will bring you to the Live Preview mode.

  • Page 15: Using The Mouse In Live Preview

    5400C Series DVR User Manual 6. Digital Zoom: Select Digital Zoom in right-click menu. 3.1.3. Using the Mouse in Live Preview Many features of the Live Preview can be quickly accessed by clicking the right-button of the mouse.  Single Camera: Switch to a full screen display of the selected camera. Camera can be selected from a drop down list.

  • Page 16: Configuring Live Preview Displays

    5400C Series DVR User Manual 1. Right-click using the mouse in Live Preview mode. 2. Select Digital Zoom from Mouse menu. 3. Left-click and drag the red box to the desired area for zoom. The zoomed image will be magnified to full screen.

  • Page 17: Record Settings

    5400C Series DVR User Manual 4 Record Settings There are multiple ways to setup your DVR for recording. They include setting up a recording schedule, triggering a recording by motion detection and/or a sensor alarm, and manually starting the recording.

  • Page 18: Scheduling A Recording

    5400C Series DVR User Manual  Max Bit Rate: Select or define custom maximum bit rate for recordings. 5. Click ADVANCED. This will bring up another menu with more advance recording options. Set additional record settings:  Overwrite: Sets to overwrite the HDD to continue recording when it is full.
  • Page 19 5400C Series DVR User Manual Select the day you would like to setup the schedule for or select All Week to record the entire week. Select to record the entire day by clicking All Day or at different time periods. Up to 8 time periods can be scheduled.

  • Page 20: Starting A Manual Recording

    5400C Series DVR User Manual 4.3. Starting a Manual Recording A manual recording can be started at any time. To start a manual recording: Start manual recording by selecting Start or Stop for the cameras desired. Note: Only when the scheduled recordings are off can user manually start or stop recording.

  • Page 21: Playback

    5400C Series DVR User Manual 5 PLAYBACK 5.1. Understanding the Playback Interface There are various controls on the Playback interface that makes viewing recordings more efficient. Audio on/off: Select to open or close the audio; : Fast backwards: Select to rewind recording files at the speed of x2, x4, x8;...
  • Page 22 5400C Series DVR User Manual 3. Click the Play button to start playback of all the files found with the specified search criteria or click the Search button to bring up the list of search results. After search results are presented, select the file you would like to playback and press Play to enter synchronous playback cameras selection.

  • Page 23: Backup

    5400C Series DVR User Manual 6 BACKUP Recorded files can be backed up to various devices, such as USB flash drives, or USB HDD. To export recorded files: 1. Enter the record backup menu by clicking Menu >Record Backup. 2. Select desired parameters to search for files to backup.
  • Page 24 5400C Series DVR User Manual  Check for compatibility from vendor. 7. Delete: Delete a file from the backup device 8. Format: Format the backup device. 9. Click Start to begin backup process.

  • Page 25: Alarm Settings

    5400C Series DVR User Manual 7 ALARM SETTINGS 7.1 Configuring Alarms 7.1.1 Setting up Motion Detection Set up properly, using motion detected recording will increase the number of days your DVR is able to record. It will only record relevant events rather than recording everything, making searching for an event easier.

  • Page 26: Setting Up Sensor Alarms

    5400C Series DVR User Manual Right click mouse to set the Motion Detection Sensitivity. Right click mouse to select Save to return to the Camera Settings menu. Click the Handle button to open the Handle menu. Select the Triggered Camera tab.
  • Page 27 5400C Series DVR User Manual 1. Select the Alarm Input and click the Set button. This will open the Alarm Input Setting menu. 2. Set the alarm input type. The options available are Normally Opened (N.O.) and Normally Closed (N.C.).
  • Page 28 5400C Series DVR User Manual 6. Click the OK button to complete setup. You may now add a schedule to start recording when an alarm is triggered (See Scheduling a Recording). Alarm outputs may also be configured in the Alarm Management menu.

  • Page 29: Triggering Alarm Outputs Manually

    5400C Series DVR User Manual Configure the settings for selected output. Select OK to save and exit. Note: If the Hold For option is selected as Manually Stop, the alarm will only stop when you manually stop it (See Triggering Alarm Outputs Manually).

  • Page 30: Detecting Video Loss

    5400C Series DVR User Manual 7.1.4 Detecting Video Loss To setup video loss detection: 1. Enter Camera Management/Settings menu by clicking Menu > Configuration > Camera Settings. 2. Select the Advanced tab. 3. Check the Video Loss Detection checkbox to enable feature.

  • Page 31: Detecting Video Tampering

    5400C Series DVR User Manual 7. Click the Apply button to finish. 8. Repeat above for other channels. If all channel and all week are the same settings, please select Copy To All Week and Copy to All channel in Advanced tab.

  • Page 32: Set Up Exception

    5400C Series DVR User Manual 7. Select the Handle tab to configure exceptions handling. Exception trigger options are further explained in the next section (See Understanding Exception Trigger Options). 8. Click the Apply button to finish. 9. Repeat above for other channels. If all channel and all week are the same settings, please select Copy To All Week and Copy to All channel in Advanced tab.

  • Page 33: Understanding Exception Trigger Options

    5400C Series DVR User Manual  IP Conflict: Conflict in IP address setting. To set exceptions: 1. Enter the Exception menu by clicking Menu > Configuration >Exception. 2. Select the exception to configure under Exception Type. 3. Select triggering options. Trigger options are further explained in the next section (See Understanding Exception Trigger Options).

  • Page 34: Network Settings

    5400C Series DVR User Manual 8 NETWORK SETTINGS 8.1 Configuring Basic Settings To configure basic network settings: Enter the Network Settings menu by clicking Menu > Configuration > Network Settings. 8.1.1 Static Select Static under General tab. Fill in IP Address, Subnet Mask, Default Gateway, Preferred DNS Server, Server Port, HTTP Port.

  • Page 35: Pppoe

    5400C Series DVR User Manual Note: when you select DHCP, the IP Address, Subnet Mask and Gateway will be obtained automatically. Please check the DVR IP in the Network Status. 8.1.3 PPPoE Select PPPoE in Network Access, Enter User Name, Password, and Confirm Password for PPPoE access.

  • Page 36: Ntp

    5400C Series DVR User Manual 3. Select the Set button next to DDNS to enter the DDNS settings menu. 4. Check the DDNS checkbox to enable feature. 5. Select DDNS Type. Support 3322 and DynDNS.  3322: Enter Device Domain name for 3322 (i.e. test.3322.org) obtained from the website www.3322.org.

  • Page 37: E-Mail Settings

    5400C Series DVR User Manual 1. Enter the Network Settings menu by clicking Menu > Configuration > Network Settings. 2. Select the Advanced tab. 3. Select the Set button next to NTP to enter the NTP settings menu. 4. Check the NTP checkbox to enable feature.

  • Page 38: Ftp Settings

    5400C Series DVR User Manual 4. Enter e-mail settings. 5. Click the Send Email button to test e-mail settings. 6. Select Attached Picture if you want to send email with alarm images, the interval of two adjacent pictures is 30s. You can also set SMTP port and enable SSL here.

  • Page 39: Ip Filter

    5400C Series DVR User Manual There are multiple icons on each display in Live Preview mode to indicate FTP uploading status when FTP uploading is triggered. These icons include: This icon indicates the DVR is uploading the streaming of this channel, and it work very well.

  • Page 40: Upnp

    5400C Series DVR User Manual 3. None: If you want to disable this function, you can select NONE for restricted type. And any IP can have access to the DVR. 8.2.6 UPNP UPnP Forum is an industry initiative designed to enable simple and robust connectivity among consumer electronics, intelligent appliances and mobile devices from many different vendors.

  • Page 41: Ptz Controls

    5400C Series DVR User Manual 9 PTZ CONTROLS 9.1 Navigating PTZ Menus PTZ menus can be navigated through mouse. For quick access to certain PTZ settings, right clicking with the mouse in a display while in PTZ control mode will bring up the PTZ settings menu.

  • Page 42: Setting Ptz Presets, Patrols & Patterns

    5400C Series DVR User Manual To configure PTZ settings: 1. Enter the PTZ Settings menu by clicking Menu > Configuration > PTZ Settings. 2. Select channel where PTZ camera is installed next to Camera label. 3. Enter PTZ settings according to the camera.

  • Page 43: Customizing Presets

    5400C Series DVR User Manual 5. Speed: Adjusts the movement speed of the PTZ. 6. Light: Turns PTZ light (if applicable) on and off. 7. Wiper: Turns PTZ wiper (if applicable) on and off. 8. Zoom In: Instantly zooms PTZ in.
  • Page 44 5400C Series DVR User Manual 2. Select the Patrol button to enter the Patrol Management menu. 3. In the Patrol Management menu, you may:  Configure Patrol: Step1: Select a Patrol Number to set. Step2: Select valid presets (See Customizing Presets) and click the Set button to enter the Patrol configuration menu.

  • Page 45: Customizing Patterns

    5400C Series DVR User Manual  Call Patrol: Step1: Select a valid Patrol Number. Step2: Click the Start button to call the patrol, select the stop button to stop the patrol. 9.3.4 Customizing Patterns Patterns can be setup by recording the movement of the PTZ.
  • Page 46 5400C Series DVR User Manual To record a new pattern, select the Run Record button to start recording of the movements of the PTZ. Use the PTZ control panel to move the PTZ. The PTZ movements will be recorded until the Stop Record button is clicked.

  • Page 47: Camera Management

    5400C Series DVR User Manual 10 CAMERA MANAGEMENT 10.1 Configuring OSD Settings On Screen Display (OSD) settings can be configured in the Camera Management menu. The OSD is shown in each display during Live Preview mode and includes the time and date as well as the camera name.

  • Page 48: Adjusting Display Settings

    5400C Series DVR User Manual Select channel to setup privacy mask under Channel #. Click the Set button. Select the Advanced tab to enter the Advanced Camera Settings menu. Check the Mask checkbox to enable feature. Click the Area Settings button to enter Area Settings menu.
  • Page 49 5400C Series DVR User Manual...

  • Page 50: Hdd Management

    5400C Series DVR User Manual 11 HDD MANAGEMENT 11.1 Managing HDDs A newly installed hard disk drive (HDD) must be first initialize before it can be used with your DVR. Initializing the HDD will erase all data on it. To initialize a HDD: 1.

  • Page 51: Configuring Hdd Alarms

    5400C Series DVR User Manual To view SMART information of a HDD: 1. Enter the HDD Management menu by clicking Menu > HDD Management. 2. Select S.M.A.R.T tab. From S.M.A.R.T, we can see the status of the HDD and the detailed information of HDD.

  • Page 52: Dvr Management

    5400C Series DVR User Manual 12 DVR MANAGEMENT 12.1 Configuring System Settings 12.1.1 Configuring General Settings General settings such as the system language can be configured in the General Settings menu of your DVR. To configure general settings: 1. Enter the General Settings menu by clicking Menu > Configuration > General Settings.

  • Page 53: Configuring Advanced Settings

    5400C Series DVR User Manual 12.1.2 Configuring Advanced Settings To configure more advanced settings: 1. Enter the General Settings menu by clicking Menu > Configuration > General Settings. 2. Click the More Settings tab; this will take you to the More Settings menu.
  • Page 54 5400C Series DVR User Manual 2. Select the Add button to enter the Add User menu. 3. Enter information for new user, including User Name, Password, Level. 4. The Level is the user level and is separated into two tiers.
  • Page 55 5400C Series DVR User Manual 6. Configure privileges for local settings under Configuration tab. The Configuration include:  General Settings: Set the language, video standard, VGA resolution, HDMI, time zone, display date format and system time, etc.  Camera Settings: Enable and disable analog channels.

  • Page 56: Deleting A User

    5400C Series DVR User Manual  Manual Alarm: Locally start and stop manual alarm.  Maintenance: DVR upgrade, default settings, search log, etc. 8. Click the OK button to save and exit menu. Note: If you forget the password to your DVR, contact your supplier with the serial number of your DVR to obtain a secure code to reset your DVR.

  • Page 57: Managing System

    5400C Series DVR User Manual 12.3 Managing System 12.3.1 Importing & Exporting Configuration Configuration information from your DVR can be exported to a USB device and imported into another DVR. This will allow you to efficiently setup the same configuration on numerous DVRs.

  • Page 58: Restoring Default Settings

    5400C Series DVR User Manual 3. Select the firmware on the USB device. 4. Select Upgrade to begin the update process. 5. After the system firmware has been updated, reboot the DVR. Note: If the DVR fails to update, please contact your system supplier for further assistance.

  • Page 59: Viewing System Logs

    5400C Series DVR User Manual 2. Select OK to exit to the previous screen. 12.3.5 Viewing System Logs Many events of your DVR are logged into the system logs. To access the system logs and search for these events: 1. Enter the Log Search menu by clicking Menu > Maintenance > Log Search.
  • Page 60 5400C Series DVR User Manual 4. Click Cancel to exit out of menu.

  • Page 61: Remote Surveillance

    5400C Series DVR User Manual 13 REMOTE SURVEILLANCE The system features a built-in browser-based software that allows you to access your system remotely over your local area network (LAN) or over the Internet using Internet Explorer. Install the software through the IE browser of OS and you operate the network remotely and conveniently.
  • Page 62 5400C Series DVR User Manual You must install the ActiveX in order to access your system. Click the attention bar at the top of the main page and select Install ActiveX Control. DVR Net viewer will reset. In the warning box click Install. The login page appears.

  • Page 63: Remote Live View

    5400C Series DVR User Manual 13.2. Remote Live View Upon login, the Remote Surveillance main screen appears in your browser. By default, remote surveillance opens in Preview mode (split-screen). 1） Modes: Preview, Playback, and Setup. 2） Channel: Channel number appears in the left of the main screen. You can double click the channel number to open / close the preview of this channel.

  • Page 64: Remote Playback

    5400C Series DVR User Manual 1. Click this button you can record video of the selected channel directly to your PC. By default, recorded files are saved in C:\Downloadfile. You can modify the directory in Setup -> Local Setup page.

  • Page 65: Setup

    5400C Series DVR User Manual Playback control bar: 1） Play / Pause. 2） Stop 3） Slow-down 4） Speed-up 5） Single frame forward 6） Snap shot 7） Download the recording file. The default 8） Mute / Unmute 9） Volume control 10） Play position scroll bar 13.4.

  • Page 66: Appendix

    5400C Series DVR User Manual 14 APPENDIX 14.1. Glossary 1. Dual Stream: Dual stream is a technology used to record high resolution video locally while transmitting a lower resolution stream over the network. The two streams are generated by the DVR, with the main stream having a maximum resolution of 4CIF and the sub-stream having a maximum resolution of CIF.

  • Page 67: Faq

    5400C Series DVR User Manual 12. USB: Acronym for Universal Serial Bus. USB is a plug-and-play serial bus standard to interface devices to a host computer. 14.2. FAQ • Why does the DVR seem unresponsive when operating with the IR remote control?

This manual is also suitable for:

5500e series

Table of Contents