Advertisement
1
Setting Up
Connecting up
Turning on
PLUG IN YOUR MAINS
TO 12 V DC ADAPTOR
Step 1.1
Step 1.2
1. Connect the aerial cable to RF IN. 2.Connect the
Connect the mains adaptor to a mains power outlet
HDMI cable between the HDMI connector on your
socket and turn on the power socket. Next connect the
digital recorder and the HDMI on your TV. 3. Connect
the output from the power supply to the DC IN
power jack connector to the DC IN connector on the
rear panel of the digital box.
connector on your digital box.
Fitting batteries to remote control
Connecting to a router
BATTERY
COMPARTMENT
LID
CLIP
BATTERIES
TYPE AAA
BATTERY
COMPARTMENT
Step 1.4 - optional at this stage
Step 1.3
Connect an Ethernet cable (not included) to the
Remove the battery cover from the remote control and
NETWORK connection on your digital box. Connect
insert 2 x AAA batteries (supplied) into the battery
the other end of the Ethernet cable to a free Ethernet
compartment. Replace the battery cover.
socket on the back of your router.
2
First Time Install
First time installation
SWITCHED MAINS OUTLET SOCKET
CONNECT TO THE DC IN CONNECTOR
ON THE DIGITAL BOX REAR PANEL
Step 2.1
If 'Easy' is not already selected, press the t button
on your remote control to select it.
Viewing installed channels
ROUTER
4
Step 2.3
Press the OK button when scanning has finished. The
screen displays 'Installation complete'. Press the OK
button again to begin watching TV.
3
Starting installation
Getting around the Guide
FAV
ONLINE
To open the Guide, press the GUIDE Button.
Press the p and q buttons to select a new channel,
and the u Buttons to select the programme and press
Step 2.2
the OK Button to watch the selected programme.
Press the OK button to start the installation. It will take
about 8 minutes for your digital box to find all the channels.
To close the GUIDE window press the GUIDE Button
again or press the BACK Button.
Auto view of first channel
The Main Menu
To open the Main Menu, press the MENU button.
Step 2.4
Press the p and q Buttons to select an option.
The channel at the top of the channel list will be shown
on your TV. The information banner along the bottom
From this menu you can organise your channels, retune
will be shown on screen for a short time.
your digital box, change the default settings, connect
to BBC iPlayer, or look at the system information.
Getting started
Now and Next information
To see what's coming on next press the i-Button on
your remote control to show programme name and
broadcast times for the current and next programmes.
Press the i-Button a second time to view more
information including a synopsis of the programme.
programmes on other channels (rows). Press the
i-Button again to remove these programme details.
BBC iPlayer
To run the BBC iPlayer application, the digital recorder
must be connected as shown in Fig 1.4. The router
must be connected to the internet.
Press the p and q Buttons to select BBC iPlayer and
press OK to display the BBC iPlayer home page. Use
the p ,q, p and q Buttons to navigate the page.
Advertisement
