• Yellow CAT-5e crossover cable • Beige console cable Unpack the box and verify that all items are included. If parts are missing, contact F5 Networks Technical Support. CAUTION: The power cord included with the WANJet appliance is for exclusive use with the WANJet appliance. Do not use this power cord with other electrical appliances.
Page 3
4 Set the addresses The WANJet appliance is shipped with the following default values: • IP address 192.168.168.100 • Subnet mask 255.255.255.0 Important The following instructions are for a PC with Windows ® XP installed. If the computer or laptop that you are using to access the WANJet appliance is currently connected to your corporate LAN, you must remove the corporate LAN cable from the computer before proceeding.
Need help?
Do you have a question about the WANJet 200 and is the answer not in the manual?
Questions and answers