Operation Buttons for Still Image Recording
.
Operation But-
ton
T/W Zoom
Functions as the zoom lever.
"Zooming" (A P.27)
Quick Review
Enables the most recently captured still image to
be viewed.
"Checking the Captured Image Immediately" (A
P.28)
Auto/Manual
Switches the recording mode between Auto and
Manual.
NOTE:
The slider operation button cannot be used when the LCD monitor is
●
flipped.
The zoom appears when the slider is touched.
●
Useful Settings for Recording
When "QUICK RESTART" is set to "ON", this unit turns on immediately
●
if you open the LCD monitor within 5 minutes after the power is turned
off by closing the monitor.
"QUICK RESTART" (A P.97)
When "AUTO POWER OFF" is set to "ON", this unit turns itself off au-
●
tomatically to conserve power when it is not operated for 5 minutes.
(only when using the battery pack)
"AUTO POWER OFF" (A P.95)
CAUTION:
Do not expose the lens to direct sunlight.
●
Do not use this unit in the rain, snow, or places with high humidity like
●
the bathroom.
Do not use this unit in places subject to excessive humidity or dust, as
●
well as places exposed to steam or smoke directly.
The access lamp lights up when still image recording is in progress. Do
●
not remove the battery pack, AC adapter, or SD card when the lamp is
lighted.
NOTE:
Before recording an important scene, it is recommended to conduct a
●
trial recording.
DIS does not work when recording still images.
●
Zooming
The angle of view can be adjusted using zoom.
Use the W end (wide angle end) to shoot a wider field of view.
●
Use the T end (telephoto end) to magnify the subject for shooting.
●
.
You can also use the slider's T/W zoom to zoom.
●
Description
.
NOTE:
Only optical zoom is available in the still image recording mode.
●
Recording
27