DallaCorte DC II GCS User Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

INDEX

Data Tag

Accessories List

Installer's Guidelines

User's manual

Brush for cleaning

Package of tablets for internal cleaning

Ground coffee container

ATTENTION

This machine is to be used exclusively for the kind of activity it was designed for. Any other use will be

considered improper and therefore unreasonable. The manufacturer will not be responsible for possible

damages arising from improper, incorrect or unreasonable use of the equipment

Carefully read instructions and guidelines contained in this manual and in the "User's Manual", as they

supply important instructions concerning the installation and operation of the unit.

Verify that the user has prepared AN ELECTRICAL SOCKET following the current regulation of the

country where it is installed , making sure that its electric capacity is appropriated for the maximum power

of the grinder, indicated on its data tag.

In case of replacement of the supply cable of the grinder , only use cables as advised by the

manufacturer.

Electric safety is reached only when the electric system connected to the grinder is properly grounded.

USER'S MANUAL

For D C II GCS grinder

DATA TAG

ACCESSORIES LIST

ATTENTION

RELEASE 1.07

Table of Contents

Need help?

Do you have a question about the DallaCorte DC II GCS and is the answer not in the manual?

Questions and answers

Summary of Contents for DallaCorte DallaCorte DC II GCS

Page 1 USER’S MANUAL For D C II GCS grinder INDEX Data Tag Accessories List Installer’s Guidelines Installation Initial Set Up Setting Alarms Management DATA TAG ACCESSORIES LIST User’s manual Brush for cleaning Package of tablets for internal cleaning Ground coffee container ATTENTION ATTENTION This machine is to be used exclusively for the kind of activity it was designed for.
Page 2 Moreover , the use of any electrical appliance requires certain precautions: Do not operate machine while hands or feet are wet Do not operate machine while barefoot Do not allow children and /or not properly trained people to use the machine Do not clean machine by spraying water on it Do not leave machine on while it is unattended INTRODUCTION...
Page 3 DESCRIPTION COMMAND PANEL PICTURE 10 START UP Switch on the general switch of the grinder pic.9. When on the display you see the following screen , it means that the grinder is ready to start working DALLA-CORTE-GCS GRINDER READY FUNCTIONS OF THE GRINDER The normal functions of the D C II are the following: •...
Page 4 When you have finished the regulation of the grinding, confirm the modification with P5 or wait for % seconds to automatically get out of this option REGULATIONS OF THE MACHINE Flow scheme of the menus DALLA-CORTE-GCS GRINDER-----READY INSTALLER’S USER’S MENU MENU P5 x 5 sec.
Page 5 USER’S MENU The user can enter some menus to perform the following operations: HOW TO PROGRAM DOSES (P6-P7-P8-P9) From the main screen , press P5 once to see this menu and then P5 once more to enter it and you will see: setting range 1) DOSES PROGRAMMING...
Page 6 VISUALISATION ALARMS This grinder allows you to see a series of information (alarms) about its functioning To see possible alarms ,press P5 once from the main screen and then P3 for three times , then you will see : Alarms If you press P5 again, you can see one or more of the following alarms: 01- LOSS OF DATA –...

This manual is also suitable for:

D c ii gcs