Table of Contents
Advertisement
Quick Links
© EUROHEAT DISTRIBUTORS (H.B.S) LTD. Nov 2006
Installation Instructions For
This manual must be used in conjunction with document
IN1173 The Wood and Multifuel Chimney and Installation Guide,
This Manual Must Always Be Available To The Stove Operator
IN1042
HARMONY
1 & 3
STANFORD
80
Wood and Multifuel Stoves
Part No.
Model Name
Serial Number
1
E & OE
Instructions Part number IN1042 Edition H
Advertisement
Table of Contents
Summary of Contents for Euroheat IN1042
- Page 1 IN1173 The Wood and Multifuel Chimney and Installation Guide, This Manual Must Always Be Available To The Stove Operator Part No. Model Name Serial Number © EUROHEAT DISTRIBUTORS (H.B.S) LTD. Nov 2006 E & OE Instructions Part number IN1042 Edition H...
-
Page 2: The Model Range Explained
Please ensure the warranty registration form is completed if you are the installer and confirm with the user that it is there responsibility to return it to Euroheat. In this way the model and its history will be recorded for reference in the future. - Page 3 Your attention is drawn to the precautions and responsibilities under the Health and Safety at Work Acts, and whatever new legislation being introduced during the life of this document. © EUROHEAT DISTRIBUTORS (H.B.S) LTD. Nov 2006 E & OE...
-
Page 4: Technical Details
0-1 mm at normal room temperature. Note: the thermostat disc is designed to close at an angle. © EUROHEAT DISTRIBUTORS (H.B.S) LTD. Nov 2006 E & OE Instructions Part number IN1042 Edition H... -
Page 5: Flue Outlet Configuration
Changing to Top Flue Connection The procedure is as fitting rear flue but follow the information in reverse and fit the flue spigot protector. © EUROHEAT DISTRIBUTORS (H.B.S) LTD. Nov 2006 E & OE Instructions Part number IN1042 Edition H... -
Page 6: Fireplace Design
12mm of non combustible material can used. This information only applies to our range of appliances. Caution do not fit a 12mm hearth to other manufactures products unless documentation is provided to prove hearth temperatures. © EUROHEAT DISTRIBUTORS (H.B.S) LTD. Nov 2006 E & OE Instructions Part number IN1042 Edition H... -
Page 7: Minimum Installation Clearances
At least 150mm the edge of which should be clearly defined At least 50mm* the edge of which should be clearly defined At least 50mm* the edge of which should be clearly defined © EUROHEAT DISTRIBUTORS (H.B.S) LTD. Nov 2006 E & OE Instructions Part number IN1042 Edition H... - Page 8 Remove support bracket retaining screws lift out protection plates. Step 3 Removing Side Protection Plates Remove support bracket retaining screws lift out protection plates. © EUROHEAT DISTRIBUTORS (H.B.S) LTD. Nov 2006 E & OE Instructions Part number IN1042 Edition H...
- Page 9 Remove grate frame. Lift rear edge of grate frame. Lift frame move to the right through side door then remove through front door. Step 5 Removing Grate Lift front of grate remove through front door. © EUROHEAT DISTRIBUTORS (H.B.S) LTD. Nov 2006 E & OE Instructions Part number IN1042 Edition H...
-
Page 10: Draught Requirements
In this instance a flue draught stabiliser may need to be fitted. The installation manual should be consulted if the flue draught pressure readings are incorrect. © EUROHEAT DISTRIBUTORS (H.B.S) LTD. Nov 2006 E & OE... -
Page 11: Commissioning Check List
For the latest editions of all Euroheat documentation visit our web site www.euroheat.co.uk. We would request that you inform Euroheat of information which you feel is not provided in this document which would assist other users in the future. The Euroheat Technical Team...
Need help?
Do you have a question about the IN1042 and is the answer not in the manual?
Questions and answers