Ipv6 Routing - D-Link DIR-865L User Manual

Section 3 - Configuration
This page allows you to specify custom routes that determine how data is moved around your network.
Route List: Check the box next to the route you wish to enable.
Name: Enter a specific name to identify this route.
Destination IP/ This is the IP address of the router used to reach
Prefix Length: the specified destination or enter the IPv6 address
prefix length of the packets that will take this route.
Metric: Enter the metric value for this rule here.
Interface: Use the drop-down menu to specify if the IP packet
must use the WAN or LAN interface to transit out of
the Router.
Gateway: Enter the next hop that will be taken if this route
is used.
D-Link DIR-865L User Manual

IPv6 Routing

111