IMPORTANT SAFETY INSTRUCTIONS
DO NOT OPEN
RISK OF ELECTRIC SHOCK
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use
to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user to the presence of
important operation and maintenance (servicing) instructions in the literature accompanying this
To prevent electric shock, do not use this polarized plug with an extension cord, receptacle or other outlet
unless the blades can be fully inserted to prevent blade exposure.
＊LINE VOLTAGE SELECTION
Just for dual voltage mode only!
Because power supplies vary from location to location we
have incorporated a selectable power supply.
The desired voltage may be set with the VOLTAGE
SELECTOR switch located under the platter. (use a
flat head screw driver).
Do not force the VOLTAGE SELECTOR switch as this
may cause damage.
If the VOLTAGE SELECTOR switch does not move
smoothly, please contact a qualified service technician.
＊ Check for the following parts included in the package with the main unit:
Do not forget to attach rubber belt to motor for correct operation. After placing
the Turntable Platter onto the turntable through the Center Spindle, move
one of the large windows on the Platter to top right corner. Attach rubber
belt around motor. (Rubber belt is already attached to the underside of the
1) Do not connect the AC power plug before assembly has been completed.
2) Before turning the power on, make sure once again all the connections and power voltage settings are
correct. Always turn off the power when connecting or disconnecting.
3) Read this manual carefully before using the unit .Be sure to store the manual in a safe place for future
CAUTION: To reduce the risk of electric shock, do not remove
any cover. No user-serviceable parts inside. Refer servicing to
qualified service personnel only.
45 rpm adaptor