Bluetooth - Samsung Galaxy Tab 8.9 User Manual

Scanning and Connecting to a Wi-Fi Network
When you turn on Wi-Fi, your device searches for available
Wi-Fi connections, then displays them on screen.
1. From any screen, touch the Time in the Status Bar.
The Status Details displays.
2. Touch Wi-Fi to turn Wi-Fi On. Your device automatically
scans for available Wireless Access Points.
3. When the scan is complete, touch a Wi-Fi network to
connect. If the Wi-Fi network is open, your device
automatically connects. If the Wi-Fi network is
secured, enter the password at the prompt to connect.
Adding a Wi-Fi Network Manually
1. From a Home screen, touch
Wireless and networks
2. Touch Wi-Fi to turn Wi-Fi On.
3. Touch Add Wi-Fi network, then enter network
information:
• Network SSID: Enter the name of the Wi-Fi Wireless Access
Point (WAP).
• Security: Select the type of security used by the WAP.
Apps Settings
Wi-Fi settings.
Note: Depending on the Security protocol used by the WAP,
additional network information may be required, such as
Proxy settings, IP settings, or a Password.
• Proxy settings: If the WAP is Open, touch Manual, if required,
and then enter Hostname, Proxy port, and No Proxy for
values.
• IP settings: If the WAP is Open, touch Static, if required and
then enter IP address, Gateway, and so on.
• Password: If the WAP is secured, enter the password or hex
key.
4. Touch Save to save the settings.

Bluetooth

Bluetooth is a short-range wireless communications
technology for exchanging information over a distance of
about 30 feet.
You do not need to line up the devices to send information
with Bluetooth. If the devices are in range, you can exchange
information between them, even if they are in different
rooms.
Connections 124