Summary of Contents for Smart+ Products SPP-SIFST-S
-
Page 1: Safety Notice
OWNERS INSTALLATION AND USER GUIDE QUARTZ INFRARED FIREPLACE STOVE HEATER Model: SPP-SIFST-S Safety Notice... - Page 2 US and are suitable for mobile homes. Thank you for choosing a SMART+ PRODUCTS Infrared Zone Heating System. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new heater.
-
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL INSTRUCTIONS, SAFETY WARNINGS, AND FAQ’s BEFORE USING THE HEATER WARNING! ! POTENTIAL FOR ELECTRICAL HAZARD IF NOT ADHERED TO! When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. - Page 4 3. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use handles (certain models) or wheels to move this heater. 4. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least (0.9m) from the front of the heater and keep them away from the sides and rear of the heater.
-
Page 5: Frequently Asked Questions (Faqs)
17. Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. 18. Do not use abrasive solvents to clean the heater as it may cause damage to the finish or casing. - Page 6 SMART+ PRODUCTS PRODUCTS Technical Support). All parts may be purchased through SMART+ PRODUCTS PRODUCTS if your product is out of warranty. Note: If you feel that the elements are definitely faulty right out of the box, contact the SMART+ PRODUCTS PRODUCTS Technical Support department first (for troubleshooting and verification).They can then direct you on to the next step.
- Page 7 2 light bulbs onto a burning log prop. The log prop may get warm, but will not melt, burn, or get excessively hot if left on all night/day. For your/your family’s safety SMART+ PRODUCTS advises all customers not to place any items or body parts into the heater’s flame effect chamber and to keep kids and pets away from opening the flame effect door.
-
Page 8: Specifications
Specifications Voltage Rating 120 V (60Hz) Power Consumption 500W/1000W Unit Size 16.3 in. (W) x 11.0in. (D) x 22.4 in. (H) Unit Weight 16.9 lbs. Lighting/Bulb Type T4 Shape/ G9 Base 25Watt Bulb (quantity 2) : It is normal for the power cord to feel warm to the touch; however, WARNING the power cord prongs must be tight and secure to the wall outlet. -
Page 9: Front View
PREPARATION 1. Remove the heater from the box. 2. Remove any packaging materials from the product. 3. Place the packaging inside the box and either store for the end of the season (if you do not have off season storage space), or dispose of safely. 4. - Page 10 Flame Effect Control Panel Freestanding Legs/Feet REAR VIEW Rear Air Inlet Vents Rear Cover Power Cord Inlet...
- Page 11 Heater Use With a compact design, this heater is one of the most versatile units available anywhere, in that it can be used in many different ways. This Heater May Be Used In the Following 7 Combinations. 1. Fan Only (No Heat) 2.
- Page 12 It is meant as a “set it and forget it” heater until it is time to turn off and unplug. o SMART+ PRODUCTS’s future models will accommodate a remote control option. The Control Panel is located inside the access door directly beneath the simulated flame.
-
Page 13: Control Panel Diagram
2. The control panel consists of two knobs and 4 switches. Here is their location and their function: A. Heat Activation Dial (only works with fan in the ON position): Activates the heat elements by turning it clockwise until it clicks. ... - Page 14 The Next section shows you how to use your heater in all 7 recommended combinations. Please reference “Heater Diagram” or “Control Panel Diagram” for key component locations, if needed. Instructions For Use (With Master Switch On / In Stand By Mode) ...
- Page 15 1. Turn the Flame Effect Switch to the ON position (switch “E”). 2. Turn the Fan Switch to the ON position (switch “B”). To Turn On the Flame Effect in the Low Heat Mode: 1. Turn the Fan Switch to the ON position (switch “B”). 2.
-
Page 16: Maintenance
The Next section shows you basics on how to care for, clean, and maintain your heater to give it longer life and make the best use of it. Please read carefully. Maintenance Always turn OFF the heater and disconnect the cord from the electrical outlet before cleaning your heater. - Page 17 The manufacturer recommends storing the unit in its original carton. Replacing the Flame Effect Lamps/Bulbs Precautions Before Replacing Lamps/Bulbs Always make sure you have consulted with SMART+ PRODUCTS Technical Support for proper troubleshooting, authorization, procedures for any self-maintenance or service of the heater.
- Page 18 scuff the paint. Items/Tools Recommended For Base Mounting: Plush soft surface (a hard surface may damage the door, handle, glass or paint) Medium Phillips Screwdriver or Power Driver. The Process 1. Power off and unplug the heater. Allow at least 10 minutes for the bulbs to cool off.
- Page 19 5. Place the cover safely out of the way so that it does not get tripped on or damaged. 6. At this point you should be able to see a silver (shiny) tinsel strip across the width of the heater. ...
- Page 20 8. Replace with T4 shape/ G9 base 25 watt bulbs only (qty 2). If unsure if you have the correct bulbs or if you cannot find elsewhere, you may always obtain or purchase from SMART+ PRODUCTS Technical Support. Do not exceed 25W per bulb as excessive heat may occur.
- Page 21 Troubleshooting Basic Issues Problem Solution Plug in but no power Master switch on panel should be turned ON Verify you have Power from your outlet by testing Master Switch ON but no power another small appliance on it Low Heat Mode Does Not work Control Panel Issue-Replace the control panel but High does High Heat Mode Does Not work...