Summary of Contents for JetMAX Automatic Commercial Swimming Pool Cleaner
- Page 1 JetMAX Automatic Commercial Swimming Pool Cleaner OPERATOR’S MANUAL PLEASE READ THE ENTIRE MANUAL CAREFULLY BEFORE USING YOUR JETMAX...
- Page 2 Hydro-Scrubbing power washing jets and collect debris in the Filter Bag down to 2 microns in size. All you have to do is put the JetMAX into your pool, turn its power on and let it do its job of filtering and vacuuming all the dirt and debris out of your pool.
- Page 3 Set your JetMAX’s Time Control Knob to 45 seconds. The JetMAX should move across your pool, at its widest point, from one side to the other. The JetMAX should wait at both sides for at least five seconds before reversing. If this doesn’t happen, adjust the Time Control Knob accordingly.
- Page 4 IN-SEASON STORAGE Never leave your JetMAX in the pool when not in use. Do Not allow swimmers in the pool while in use. After removing your JetMAX from the pool you should clean and re-install the filter bag. Then rest the JetMAX on its side in a dry, shaded area along with its Power Supply and properly coiled Floating Cable.
Need help?
Do you have a question about the Automatic Commercial Swimming Pool Cleaner and is the answer not in the manual?
Questions and answers