Operation Instructions; General Instructions; Control Button - HP L1902 Service Manual

3. OPERATION INSTRUCTIONS

3.1 General Instructions

Press the power button to turn the monitor on or off. The other control buttons are located
at front panel of the monitor. By changing these settings, the picture can be adjusted
to your personal performance.
- The power cord should be connected and insert to adaptor.
- Connect the video cable from the monitor to the computer VGA card.
- Press the power button to turn on the monitor, the power indicator will light up to Green.
3.2 Control Buttons
- Power Button:
When pressed, the monitor enters the off mode, and the LED turns blank. Press again to restore
normal status.
- (Down/ Auto) and + (Up) Button:
The -/+ Button is browse OSD key. Press a select into adjustment.
The Auto Adjust Key is used to automatically set the H Position, V Position, Clock and Phase.
- Select Key:
Select key is into OSD sub-menu hot key when OSD turn on.
- Power Indicator:
Green — Power On mode.
Amber — Power Saving mode.
Blank — Power Off Mode.
Select Button
CONTROL BUTTONS
Down / Auto Button Up Button
Page 6 of 69
HP L1902 Service Manual
On/Off Switch