Printing Pictures Via Usb; Connecting The Camera; Printing Selected Pictures - FujiFilm FinePix J27 Owner's Manual

I
Printing Pictures via USB
If the printer supports PictBridge, the camera can be connected directly to the printer and
pictures can be printed without first being copied to a computer. Note that depending on
the printer, not all the functions described below may be supported.
PictBridge
Connecting the Camera
1
Connect the supplied USB cable as shown
and turn the printer on.
2
Press the
[E
button for about a second to
turn the camera on.
iii
USB
will be displayed
in the monitor, followed by the PictBridge
display shown below at right.
• :
~i
t
TOTAL: 00000
IiIIiIi.lI
SHEETS
Printing Selected Pictures
1
Press the selector left or right to
display a picture you wish to print.
2
Press the selector up or down to
choose the number of copies (up to
99).
3
Repeat steps
1-2
to select
additional pictures. Press
MENU/OK
to display a confirmation dialog
when settings are complete.
!'llfi~tgf.!W§j
TOTAL: 9 SHEETS
OK
BACK·
4
Press
MENU/OK
to start printing.
43