Installation - TecLime TPA-2700 Manual

3. Installation

Select location
Place the unit on a flat stable surface and dry
place. Leave at least 50cm space all around the
unit.
Before you are using the unit let it be standing
upright for minimum 2 hours.
Assemble the hose

Pull out the end of the hose and fasten it to
the unit by screwing it anticlockwise
Installation of window kit

Partially open the window and then fix
the window kits to the window

The window kits can be installed on
most normal and vertical windows, and
it is adjustable

Fasten the adapter to the window kit
Important!

The length of the exhaust pipe is specially designed according to the specification of this
product. Do not replace or prolong it with your own private hose as this could cause mal-
function.

The hose can be shortened if needed.

Bending of the exhaust pipe is very critical.
Incorrect mounting can prevent the machine
from working correctly.

Take care to prevent any sharp bows or bends
of the exhaust pipe. The exhaust air must flow
freely
10