Optional Way Printer COVER RELEASE TAB UP CONTROL KEY CUTTER EDGE RIGHT CONTROL KEY LEFT CONTROL KEY DOWN CONTROL KEY CANCEL/POWER KEY FEED BUTTON POWER BUTTON POWER LIGHT Infrared Printer Interface GENERAL INFORMATION TO POWER THE MTT ON/OFF Press and hold down the Cancel/Power key for at least 1 second.
TRANSACTION FLOW In order to use the MTT effectively, there is a series of steps that must be taken. The flow chart below illustrates these steps. First, the MTT must “logon” to establish communication. The MTT is then ready to run transactions until the end of the day or shift.
Page 4
Note: This procedure assumes that Tips, Tolls and Invoice number functions are disabled. For more information on these functions, refer to the WAY Systems web site at www.waysystems.com. From the Transactions menu, press the Right Control Key to select Sale.
OTHER TRANSACTIONS: SETUP CASH RECEIPT First you must Enable Cash Receipts through the MTT Setup menu. From the Way2Pay/Logon menu, press the Right Control Key to select Setup. From the Setup menu, select POS Setup. Enter the Admin password (default password is 1234) and select OK. Scroll down to App Settings and select.
Page 6
RETURN (REFUND) TRANSACTION From the Transactions menu, select Other Transactions. From the next Transactions menu, select Return. Swipe the customer’s card. Please swipe your card… Enter amount of return in dollars and cents with no decimal point (example: for $20.00, enter 2000). Enter Amount 2000 Clear...
STEP 3: LOGOFF continued If any offline transactions are stored in the MTT, you are prompted to upload and print receipts for them (select Done when finished). The Reconcile function then starts automatically and the batch of all offline and online transactions is closed.
Need help?
Do you have a question about the MTT 1510 and is the answer not in the manual?
Questions and answers