Table of Contents
Advertisement
6. Installation and Operation
6.1 Installation
(1) Plug the power adapter into the video splitter, the front panel's power LED
should turn Blue.
(2) Use VGA Cable (Male-Female), plug female connector to video splitter's"
INPUT", the other male connector to VGA resource (PC/Notebook's VGA
port or standard VGA output port). If a VGA signal is detected, the front
panel's active LED should turn Red.
(3) Plug the connector of VGA output device, VGA monitor or projector, to the
"Monitor" port of video splitter. Please notify that the VGA output range
should under the Input range of monitor.
(4) You may use additional VGA cable to extend the monitor connection. The
VGA cable should satisfy the UI2919 standard to provide optimum display.
6.2 Product Connection
2-Port Video Splitter Connection
2/4/8-Port 350MHz Video Splitter
4 / 8
Advertisement
Table of Contents
