Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Aktacom ATE-1509
Summary of Contents for Aktacom ATE-1509
- Page 1 DATALOGGING LIGHTMETER ATE-1509 USER MANUAL www.tmatlantic.com...
- Page 2 INSTRUCTION ¾ The digital illuminance meter is a precision instrument used to measure illuminance (Lux, footcandle) in the field. ¾ It is meet CIE photopic spectral response. ¾ It is fully cosine corrected for the angular incidence of light. ¾ The illuminance meter is compact, tough and easy to handle owing to its construction.
-
Page 3: Specifications
¾ Short rise and fall times. ¾ Peak-hold function for tracing the peak signal of light pulse with least duration 10 s and keep it. ¾ Capable of selecting measuring mode in Lux or FC scale alternatively. ¾ Auto power off 15minutes or disable AUTO power off. ¾... -
Page 4: Name Of Parts And Positions
response curve). ¾ Spectral Accuracy: CIE V function f1’ 6% ¾ Cosine Response: f2’ 2% Accuracy: ±3% rdg±0.5%f.s.(<10,000Lux), ±4% rdg±10d.(>10,000Lux) ¾ Repeatability: ±3% ¾ Sampling Rate: 1.3 times/sec of analog bar-graph indication;1.3times/sec of digital display. Datalogger sampling could be setup. ¾... - Page 5 Power Control key: The power switch key turns the illuminance meter ON or OFF. LCD Display: 3-3/4 digit displays with a maximum reading of 3999,and the indicating signs of measured values, unit function symbols and decimal points etc are display.
- Page 6 UNITS key: Pressing this key selects taking measurement of illuminance in Lux or scale(1FC =10.76 LUX). BACK-LIGHT and LOAD control key: Back light control and load the records. REC and SET key: memory the values or set the time , the sampling rate, and Enable the AUTO power off or ont.
- Page 7 Remove the photo detector cap and face it light source in a horizontal position. Press the REC/SET key and RANGE/APO key, Enable the AUTO power off or Disable this function. Read the illuminance nominal from the LCD display. Over range: If the instrument only displays “OL”, the input signal is too strong, and a higher range should be selected.
- Page 8 mode. Press MAX/MIN key again to exit this mode. 10. Relative reading mode: Press REL key to enter Relative mode. The display shown zero value and the current reading will be stored as a zero-in value. Press again to exit this mode. 11.
- Page 9 Hour ->year ->week -> day -> month ->sampling ->second ->minter ->hour -.>year …….. Press MAX/MIN key to add object of setting Press HOLD key to reduce the object of seting Hold key of MEM/SETUP and UNITS to exit the setting time and sampling mode, and then confirm .
-
Page 10: Battery Check-Up & Replacement
17. HOLD the key of MEM/SETUP and LOAD 5s to clear the 99 memory . BATTERY CHECK-UP & REPLACEMENT As the battery power is not sufficient, LCD will display low battery, and replacement of one new battery is required. After turning off the meter, disconnect the battery cover with a screwier. -
Page 11: Maintenance
MAINTENANCE The white plastic disc on the top of the detector should be cleaned with a damp cloth when necessary. Do not store the instrument where temperature or humidity is excessively high. The reference level, as marker on the face plate, is the tip of the photo detector globe. - Page 12 LOCATIONS OFFICE Conference, 200~750 18~70 Reception room Clerical work 700~1,500 65~140 Typing drafting 1,000~2,000 93~186 FACTORY Visual work at 300~750 28~70 production line Inspection work 750~1,500 70~140 Electronic parts 1,500~3,000 140~279 assembly line Packing work, 150~300 14~28 Entrance passage HOTEL Public room, 100~200 9~18...
- Page 13 HOSPITAL Sickroom, 100~200 9~18 Warehouse Medical Examination 300~750 28~70 Room Operating room, 750~1,500 70~140 emergency treatment SCHOOL Auditorium, Indoor 100~300 9~28 Gymnasium Class room 200~750 18~70 Laboratory, Library, 500~1,500 47~140 Drafting, room Connecting to pc System requirements: Windows 98 or windows 2000 (or higher) Minimum hardware requirements Pc or notebook, 90MHz Pentium of faster, 32Mb Ram,...
-
Page 14: Installing The Software
serial interface of the PC (USB). 3, Plug the USB line connecting cable 13.6mm jack plug into the meter socket 5, Start the light meter software. 6, Selecting the COM port 3. note select the 4 COM. (Note: you should better switch the light meter on before you plug the USB line connecting cable 13.6mm jack plug into the meter) Installing the software... - Page 15 the meter. Start the software. Selected the COM port 3. note is 4. If the connection is in order, the following display will be seen on the screen. If the connection is not in order, the message “NO CONNECTION” appears on the screen.
Need help?
Do you have a question about the ATE-1509 and is the answer not in the manual?
Questions and answers