Table Of Contents; Safety Instructions; Technical Specifications; Troubleshooting - Curtis 700 series Instructions For Use Manual

Safety Instructions

This instrument was manufactured and tested according to the
applicable technical standards. It complies with all the safety
regulations as shipped from
the factory.
Installation and startup must be performed by skilled personnel.
Failure to install and operate the unit in accordance with these
instructions may result in damage or injury.
If safe operation of the instrument can no longer be ensured,
stop and secure it against accidental operation.
If instrument failure or malfunction may cause personal injury or
material damage, use additional safety measures such as limit
switches, guards, etc.
Read the Operating Instructions carefully before startup.
!
Note the safety instructions marked with this
warning symbol in this manual.

TABLE OF CONTENTS

1. Model Encodement
2. Technical Specifications
2.1 Electrical
2.2 Mechanical
2.3 Environmental
3. Installation
4. Operation
5. Troubleshooting
6. Maintenance
Page
2
6
11
14
15
16
19
19